[ { "title": "STARGATE Portal", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/stargate-portal-front.png", "backImageUrl": "images/2024/stargate-portal-back.png", "description": "Stargate Portal from the classic series.", "specialInstructions": "", "solderingInstructions": "Solder the SMD LED's and Resistors using the single pad soldering method.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Barter for one of these.", "rarity": "Super Rare", "timestamp": "8/1/2024 18:17:34" }, { "title": "2024 Butterfly", "author": "RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/2024-butterfly-front.png", "backImageUrl": "images/2024/2024-butterfly-back.png", "description": "This is my yearly butterfly minibadge with a fun 3D print addition.", "specialInstructions": "", "solderingInstructions": "https://www.youtube.com/@Herushan1", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to me for a trade or added as a bonus for supporting other projects", "rarity": "Super Rare", "timestamp": "8/2/2024 9:45:04" }, { "title": "DAU Cyber Training Range", "author": "RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/dau-cyber-training-range-front.png", "backImageUrl": "images/2024/dau-cyber-training-range-back.png", "description": "Minibadge for the DAU Cyber Enterprise Team of instructors of our range.", "specialInstructions": "", "solderingInstructions": "www.youtube.com/@Herushan1", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Attending my talk or member of the DoD and 4th Estate (have under 50 total)", "rarity": "Super Rare", "timestamp": "8/2/2024 9:47:34" }, { "title": "Gold Hoarder Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/gold-hoarder-badge-front.png", "backImageUrl": "images/2024/gold-hoarder-badge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nHave you wanted to gold on an adventure looting vaults and solving riddles to find buried chests? Consider representing the Gold Hoarders, a faction whose sole purpose is to swimming in wealth.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Gold Hoarder artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a minibadge to trade, I'll be happy to give you one.", "rarity": "Super Rare", "timestamp": "8/3/2024 18:41:30" }, { "title": "Order of Souls Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/order-of-souls-badge-front.png", "backImageUrl": "images/2024/order-of-souls-badge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nHave you wanted to defeat skeletons and discover the secrets of an ancient past? Consider representing the Order of Souls where they are committed to uncovering the mysteries of a lost past.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Order of Souls artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a minibadge to trade, I will be happy to give you one for free.", "rarity": "Super Rare", "timestamp": "8/3/2024 18:56:19" }, { "title": "Merchant Alliance Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/merchant-alliance-badge-front.png", "backImageUrl": "images/2024/merchant-alliance-badge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nHave you ever longed for the thrill of protecting the precious cargo of the Crown? Consider joining the Merchant Alliance, whose prestige comes with the honor of keeping the cargo of the Crown out of the grasps of pirates.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Merchant Alliance artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a badge to trade, I'll be happy to give you the badge for free.", "rarity": "Super Rare", "timestamp": "8/3/2024 20:45:50" }, { "title": "Reaper's Bones Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/reapers-bones-badge-front.png", "backImageUrl": "images/2024/reapers-bones-badge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nHave you ever wanted to sink helpless vessels without any repercussions? Pledge yourself to the Reaper's Bones where they keep the pirate dream alive while fighting off the Pirate Lord's forces.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Reaper's Bones artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a badge to trade, I'll be happy to give you the badge for free.", "rarity": "Super Rare", "timestamp": "8/3/2024 20:51:49" }, { "title": "Athena's Fortune Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/athenas-fortune-badge-front.png", "backImageUrl": "images/2024/athenas-fortune-badge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nDo you feel like rising above the ranks of a normal swabbie to a Pirate Legend? After hitting level 50 in three different factions, become a Pirate Legend to liberate the seas from the Reaper's grasp.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Athena's Fortune artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Similar to the game, show me proof of completing three of the other faction badges, (Gold Hoarder, Order of Souls, Merchant Alliance, or Reaper's Bones), to receive this exclusive minibadge.", "rarity": "Super Rare", "timestamp": "8/3/2024 21:03:11" }, { "title": "Sea of Thieves Minibadge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/sea-of-thieves-minibadge-front.png", "backImageUrl": "images/2024/sea-of-thieves-minibadge-back.png", "description": "Part of the Sea of Thieves minibadge set.\n\nThis is the official logo of my favorite game \"Sea of Thieves\" by Rare Ltd. I've played the game for almost four years and I've enjoyed it to the point I've dedicated an entire minibadge set to it.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Sea of Thieves artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a badge to trade, I'll be happy to give you the badge for free.", "rarity": "Super Rare", "timestamp": "8/3/2024 21:10:50" }, { "title": "Peace Was Never an Option Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/peace-was-never-an-option-badge-front.png", "backImageUrl": "images/2024/peace-was-never-an-option-badge-back.png", "description": "This minibadge was inspired by the game \"Untitled Goose Game\".", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the goose artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have a badge to trade, I'll be happy to give you the badge for free.", "rarity": "Rare", "timestamp": "8/3/2024 21:21:02" }, { "title": "Clever Girl", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/clever-girl-front.png", "backImageUrl": "images/2024/clever-girl-back.png", "description": "Inspired by the original Jurassic Park, Muldoon’s last words before he gets attacked by a Velociraptor.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering.Solder the Pin Headers to the Badge. Red LED goes on top, orange LED on bottom.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "8/11/2024 7:59:16" }, { "title": "D20", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/d20-front.png", "backImageUrl": "images/2024/d20-back.png", "description": "D20 dice for all you Dungeons and Dragons (D&D) or Dungeon Crawl Classic (DCC) Role Playing Game (RPG) lovers.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:07:13" }, { "title": "Deathly Hallows", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/deathly-hallows-front.png", "backImageUrl": "images/2024/deathly-hallows-back.png", "description": "The Harry Potter Elder Wand, Cloak of Invisibility, and Resurrection Stone coming together to form the Deathly Hallows. Always for the love Severus Snape has for Lily after all this time.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:10:25" }, { "title": "Hacker Era", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/hacker-era-front.png", "backImageUrl": "images/2024/hacker-era-back.png", "description": "\"In my era\" is a slang phrase that refers to a period of time in a persons life that is notable for something distinctive. This badge was inspired by Taylor Swifts “In my Swiftie Era”. This badge can be found in both white or black.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:20:27" }, { "title": "Hold Monster", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/hold-monster-front.png", "backImageUrl": "images/2024/hold-monster-back.png", "description": "Inspired by Baldur’s Gate 3. Hold monster is a level 5 enchantment spell. This spell allows spell casters to paralyze a creature, preventing them from acting and making them vulnerable to attacks. Cost: Action + Level 5 spell slot. Range: 18m / 60 ft. Requires concentration.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:23:20" }, { "title": "Winter Is Coming", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/winter-is-coming-front.png", "backImageUrl": "images/2024/winter-is-coming-back.png", "description": "Inspired by Game of Thrones, House Stark motto. This badge can be found in white or black.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:26:14" }, { "title": "UNIX System", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/unix-system-front.png", "backImageUrl": "images/2024/unix-system-back.png", "description": "Jurassic Park, where the biggest threat to humanity wasn't the dinosaurs, but a UNIX system and a clever velociraptor.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 8:28:50" }, { "title": "40oz Stanley Mug", "author": "atticus & kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/40oz-stanley-mug-front.png", "backImageUrl": "images/2024/40oz-stanley-mug-back.png", "description": "Everywhere you go, you carry this trusty companion that keeps your drinks ice-cold for hours or piping hot through the day. It's built like a tank, with a handle that makes it easy to grab and go. Whether you're on a hike, at the office, or just lounging at home, it’s always by your side, ensuring you stay hydrated without any spills, thanks to its sturdy lid. The best part? It's got that classic, timeless look that turns heads and sparks conversations. This badge can be obtained in one of four colors, black or blue (get from atticus), white or purple (get from kittysedai).", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with us.", "rarity": "Super Rare", "timestamp": "8/11/2024 16:08:51" }, { "title": "Rolling Stones", "author": "atticus", "profilePictureUrl": "", "frontImageUrl": "images/2024/rolling-stones-front.png", "backImageUrl": "images/2024/rolling-stones-back.png", "description": "This is the famous tongue logo for The Rolling Stones, now in mini badge form.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 16:11:09" }, { "title": "Coca-Cola", "author": "atticus", "profilePictureUrl": "", "frontImageUrl": "images/2024/coca-cola-front.png", "backImageUrl": "images/2024/coca-cola-back.png", "description": "Coca-Cola offers a unique and refreshing taste that perfectly balances sweetness and carbonation, making it an enjoyable drink for any occasion. Its rich history and iconic branding evoke a sense of nostalgia and tradition, connecting generations and creating lasting memories.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 16:13:32" }, { "title": "Discord", "author": "atticus", "profilePictureUrl": "", "frontImageUrl": "images/2024/discord-front.png", "backImageUrl": "images/2024/discord-back.png", "description": "Keeping up with Discord notifications can be challenging, here is a mini badge to remind you to look at the SAINTCON Discord.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 16:15:46" }, { "title": "Shut up and take my money!", "author": "atticus", "profilePictureUrl": "", "frontImageUrl": "images/2024/shut-up-and-take-my-money-front.png", "backImageUrl": "images/2024/shut-up-and-take-my-money-back.png", "description": "Inspired by Futurama, shut up and take my money!", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering. Solder the resistor using the single-pad method for hand soldering. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "8/11/2024 16:30:25" }, { "title": "Warthog v2", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/warthog-v2-front.png", "backImageUrl": "images/2024/warthog-v2-back.png", "description": "Halo Warthog blacked out edition.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LEDs first, using the single-pad method for hand soldering.\n(The single LED in your packet is multicolor and goes on the gun.) \n• Solder the Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Barter for one of these", "rarity": "Super Rare", "timestamp": "8/14/2024 19:28:07" }, { "title": "Halo GHOST Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/halo-ghost-minibadge-front.png", "backImageUrl": "images/2024/halo-ghost-minibadge-back.png", "description": "Ghost vehicle from the Halo Video Game.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LEDs first, using the single-pad method for hand soldering.\n(The single LED in your packet goes on the back. The two packed together are for the guns.)\n• Solder the Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter for one of these", "rarity": "Super Rare", "timestamp": "8/14/2024 19:36:03" }, { "title": "Wicked Awesome Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/wicked-awesome-minibadge-front.png", "backImageUrl": "images/2024/wicked-awesome-minibadge-back.png", "description": "Did you wonder if there was going to be a wicked awesome minibadge at Saintcon this year? Well.... Here it is. Right in front of you. While supplies last.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come up and say, \"So... I heard you have a WICKED AWESOME MINIBADGE!\" And you will be one of the few people cool enough to get one.", "rarity": "Super Rare", "timestamp": "8/14/2024 20:17:39" }, { "title": "Managed Methods Minibadge", "author": "Sponsor", "profilePictureUrl": "", "frontImageUrl": "images/2024/managed-methods-minibadge-front.png", "backImageUrl": "images/2024/managed-methods-minibadge-back.png", "description": "Managed Methods. Is one of our amazing sponsors this year. Focusing on K-12 Cybersecurity products to keep your environment secure. \"In the Dark of the web, Managed Methods is the light!\"", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Leds and resistors are labeled on the back of the board.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Stop by and visit our Sponsor Booth! \n\nScan the QR Code Below for detailed build instructions and to lean more about our company.", "rarity": "Rare", "timestamp": "8/14/2024 20:59:26" }, { "title": "AI Community Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/ai-community-minibadge-front.png", "backImageUrl": "images/2024/ai-community-minibadge-back.png", "description": "Would you like to play a game? Come to the AI Community for gamified challenges or get hands-on with some of the latest AI tech available including Chat GPT 4o, Claude 3.5, and Dall-e, Midjourney, and many other ground-breaking models.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the 0805 LED(s) first, using the single-pad method for hand soldering.\n• Solder the 1206 LED for the eye reversed, so the led faces the hole.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our community and participate!", "rarity": "Rare", "timestamp": "8/14/2024 21:15:44" }, { "title": "APPSEC Challenge Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/appsec-challenge-minibadge-front.png", "backImageUrl": "images/2024/appsec-challenge-minibadge-back.png", "description": "Do you have what it takes to find and fix vulnerabilities in source code? Compete against other attendees to be the first to fix all vulnerabilities in a web application. Clone the repo, find vulnerabilities, fix them, and submit your code to get a score. Not sure how to get started? Visit the AppSec community and learn how to use tools that will do the dirty work of finding vulnerabilities for you.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and Fix vulnerabilities, it’s our biggest challenge.", "rarity": "Uncommon", "timestamp": "8/15/2024 9:30:45" }, { "title": "Official Attendee Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/official-attendee-minibadge-front.png", "backImageUrl": "images/2024/official-attendee-minibadge-back.png", "description": "WELCOME TO SAINTCON 2024! Every year Saintcon Commitee, Staff, Volunteers, and many others spend countless countless hours making Saintcon the best conference of your year. \n We are grateful to be able to do this for the community and hope you have a great time learning, hacking, and working with friends, old and new. If you have been coming to Saintcon for 20 years, or if this is your first time. Welcome!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Official", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Get your ticket for Saintcon and be ready to experience the Con!", "rarity": "Common", "timestamp": "8/15/2024 9:41:26" }, { "title": "Eiffel65 Blue Team Community Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/eiffel65-blue-team-community-minibadge-front.png", "backImageUrl": "images/2024/eiffel65-blue-team-community-minibadge-back.png", "description": "Eiffel65 is a blue team (defensive security) community. In this shade of Blue we’ll entertain the topics of Threat Intelligence, Threat Hunting, Incident Response, and Forensics. You can expect to get a taste of the day to day responsibilities, duties, and tools in these areas.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in our community.", "rarity": "Uncommon", "timestamp": "8/15/2024 9:54:21" }, { "title": "Briefs Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/briefs-community-minibadge-front.png", "backImageUrl": "images/2024/briefs-community-minibadge-back.png", "description": "Briefs is your chance to speak in front of your peers. Casual, small room environment, on any topic you that interests you, and you would like to share with others. A fun project you’ve dabbled in, that was a wild success, or crash and burn failure. But what did you learn from the experience that others can build on, or give advice. Come share. The only caveat, the talk is 10 minutes or less.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Sign up and give a presentation. 10 Minutes or less.", "rarity": "Uncommon", "timestamp": "8/15/2024 10:12:15" }, { "title": "Education Security Community Minibadge (ESC)", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/education-security-community-minibadge-esc-front.png", "backImageUrl": "images/2024/education-security-community-minibadge-esc-back.png", "description": "Our community will focus on the security needs and collaboration that is helpful for our K12, higher education and library educational communities. Presentations, walk-ups and hands-on workshops will focus on open discussions and real-world cybersecurity experiences in the education environment.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come learn how we defend against, and educate student “hackers” and other highly important educational organizations cybersecurity topics.", "rarity": "Uncommon", "timestamp": "8/15/2024 10:19:33" }, { "title": "Saintcon Golf Club", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/saintcon-golf-club-front.png", "backImageUrl": "images/2024/saintcon-golf-club-back.png", "description": "Come experience the ultimate mini-golf experience.\n\nWhere else will you be able to play mini-golf at a conference? Come play a round of mini-golf that weaves its way around the conference itself.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Event", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Everything you need to know…\n• We will provide golf clubs and foam training balls. \n• Do not bring your own golf balls and\n• Keep it safe (No Happy Gilmore moves)\n• Meet at the lounge.", "rarity": "Rare", "timestamp": "8/15/2024 10:26:24" }, { "title": "Hack in the Box Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/hack-in-the-box-minibadge-front.png", "backImageUrl": "images/2024/hack-in-the-box-minibadge-back.png", "description": "Evening hacker space, near the event venue, which opens after the main speaking tracks and conference have closed for the day. Offers some accommodations for soldering, presentations, networking, and contest collaboration.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Event", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come hang out and claim a minibadge!", "rarity": "Rare", "timestamp": "8/15/2024 10:44:20" }, { "title": "ICS Escape Challenge (Escaped)", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/ics-escape-challenge-escaped-front.png", "backImageUrl": "images/2024/ics-escape-challenge-escaped-back.png", "description": "New this year is the ICS (Industrial Control System) Challenge! Test your skills in this escape room style Contest.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Get one of the coveted ESCAPED Minibadges by escaping the room. Or get one of the FAILED badges, by ......FAILING!!!", "rarity": "Uncommon", "timestamp": "8/15/2024 11:00:18" }, { "title": "ICS Escape Challenge (Failed)", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/ics-escape-challenge-failed-front.png", "backImageUrl": "images/2024/ics-escape-challenge-failed-back.png", "description": "New this year is the ICS (Industrial Control System) Challenge! Test your skills in this escape room style Contest.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Get one of the coveted ESCAPED Minibadges by escaping the room. Or get one of the FAILED badges, by ......FAILING!!!", "rarity": "Uncommon", "timestamp": "8/15/2024 11:03:03" }, { "title": "Space Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/space-community-minibadge-front.png", "backImageUrl": "images/2024/space-community-minibadge-back.png", "description": "The space community is an experience that is out of this world. You’ll delve into the cutting-edge technologies powering satellites, communication networks, and rockets that fuel space exploration. As space becomes increasingly interwoven with our terrestrial networks, this community is at the forefront of ensuring the cybersecurity of these critical systems.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in our community.", "rarity": "Uncommon", "timestamp": "8/15/2024 11:17:23" }, { "title": "Tamper Evident Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/tamper-evident-community-minibadge-front.png", "backImageUrl": "images/2024/tamper-evident-community-minibadge-back.png", "description": "If a container or object is “Tamper Evident” it is designed to make it obvious if someone has opened or modified it. Tamper evident seals, and devices we rely on are like any other security control, they have vulnerabilities.\n\nThe Tamper Evident community is all about bypassing these security devices without leaving any physical proof behind. This involves using heat, chemicals, brute force, and a keen eye for imperfections.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our community.", "rarity": "Uncommon", "timestamp": "8/15/2024 11:58:32" }, { "title": "Cry Some More", "author": "DistinctM1nd & klipper", "profilePictureUrl": "", "frontImageUrl": "images/2024/cry-some-more-front.png", "backImageUrl": "images/2024/cry-some-more-back.png", "description": "It has been said that certain MiniBadges are difficult to assemble. With that in mind, we offer, \"Cry Some More\". An artistic representation of the cries of sorrow about the difficulty of assembling MiniBadges falling on deaf ears.", "specialInstructions": "", "solderingInstructions": "Let's be honest, some text instructions likely aren't going to help you...if only there was a clue on the badge...", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and trade me, or ask for one, or do an interpretive dance, tell me you like my hat, bring me a Sugar Free Redbull, honestly...after seeing it you probably don't want one", "rarity": "Super Rare", "timestamp": "8/16/2024 11:05:00" }, { "title": "Nessie Badge", "author": "Mister X", "profilePictureUrl": "", "frontImageUrl": "images/2024/nessie-badge-front.png", "backImageUrl": "images/2024/nessie-badge-back.png", "description": "The inspiration for this minibadge came from the Nessie plush from Apex Legends. This is probably one of the cutest designs I've gotten to do.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering. \n• Solder the two Resistors using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers, with the Nessie artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or if you don't have any badges to trade, I would be glad to give you one for free.", "rarity": "Super Rare", "timestamp": "8/16/2024 12:26:30" }, { "title": "Map Compass", "author": "MasterMapper", "profilePictureUrl": "", "frontImageUrl": "images/2024/map-compass-front.jpg", "backImageUrl": "images/2024/map-compass-back.jpg", "description": "I really like maps and thought this could be a fun one. Perhaps I will make is a series and a new map element every year.", "specialInstructions": "", "solderingInstructions": "• DO NOT SOLDER THESE LED's AT OVER 300 DEGREES CELSIUS OR THEY WILL MELT!\n• Solder the LEDs first, using the single-pad method for hand soldering.\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Ask or trade", "rarity": "Super Rare", "timestamp": "8/19/2024 15:58:45" }, { "title": "Hacker", "author": "SynAck", "profilePictureUrl": "", "frontImageUrl": "images/2024/hacker-front.png", "backImageUrl": "images/2024/hacker-back.png", "description": "Thought it would be a cool badge to create.", "specialInstructions": "", "solderingInstructions": "None", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Message Me", "rarity": "Super Rare", "timestamp": "8/23/2024 16:51:09" }, { "title": "Palo Alto", "author": "SynAck", "profilePictureUrl": "", "frontImageUrl": "images/2024/palo-alto-front.png", "backImageUrl": "images/2024/palo-alto-back.png", "description": "Thought it would be nice to see Palo Alto represented here.", "specialInstructions": "", "solderingInstructions": "None", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Message Me", "rarity": "Super Rare", "timestamp": "8/23/2024 16:53:38" }, { "title": "Vault Challenge Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/vault-challenge-minibadge-front.png", "backImageUrl": "images/2024/vault-challenge-minibadge-back.png", "description": "Welcome to The Vault, the premier physical penetration test challenge at SAINTCON! If you have a knack for bypassing doors, picking locks and subverting security systems, then this is the ultimate challenge for you.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "The Vault’s open structure allows multiple teams of competitors to engage in the challenge simultaneously. Come and participate to get one of these.", "rarity": "Uncommon", "timestamp": "8/25/2024 12:55:23" }, { "title": "APPSEC Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/appsec-community-minibadge-front.png", "backImageUrl": "images/2024/appsec-community-minibadge-back.png", "description": "The AppSec community is back with more tools, more content, and more challenges!\n\nWe will guide attendees in the finding and fixing vulnerabilities, through manual processes and use of SAST, DAST, and SCA tools. Sample vulnerable repositories will be provided for attendees to learn and practice the use of these tools.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Stop by our community to get one of these! Make sure to jump in on the APPSEC Challenge to get both of our minibadges.", "rarity": "Uncommon", "timestamp": "8/25/2024 13:04:42" }, { "title": "Women In Cybersecurity - Advocates", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/women-in-cybersecurity-advocates-front.png", "backImageUrl": "images/2024/women-in-cybersecurity-advocates-back.png", "description": "The WiC Advocates Community is geared towards providing: \n\nSupport and community for people of all genders in cybersecurity who recognize that gender inequality and issues exist within cybersecurity and want to support change.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Stop by, pick up a badge and get career advice from WiC Advocates within the industry for others looking to move up and for those who wish to get started. There will be resume reviews, 1:1 career advice with industry experts, headshots and more!", "rarity": "Uncommon", "timestamp": "8/25/2024 13:21:12" }, { "title": "TFHT - Tin Foil Hat Talks Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/tfht-tin-foil-hat-talks-minibadge-front.png", "backImageUrl": "images/2024/tfht-tin-foil-hat-talks-minibadge-back.png", "description": "There is significant evidence that the TFHT Minibadge does exist,\nand the conspiracy is not a conspiracy, we have proof that with\nthe Minibadge is actually a tracker and serves to augment all\nfields of mind control, making it the most dangerous element of\nthis supposed “security conference”.", "specialInstructions": "", "solderingInstructions": "Were not certain this badge exists.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Event", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "There are reports the Klippy used this technology to gain control. Further information on this undisclosed event can be found........54 68 65 20 74 72 75 74 68 20 69 73 20 6F 75 74 20 74 68 65 72 65 0A", "rarity": "Rare", "timestamp": "8/25/2024 13:33:23" }, { "title": "Hackers Challenge Contest Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/hackers-challenge-contest-minibadge-front.png", "backImageUrl": "images/2024/hackers-challenge-contest-minibadge-back.png", "description": "Hackers Challenge is the premiere challenge of SAINTCON.\nThe Hackers Challenge contest is an event held annually during the SAINTCON conference to challenge your skills as a security professional by presenting players with technology, logical, and security related puzzles and challenges.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Participate and gain one of these amazing Hackers Challenge 2024 Minibadges.", "rarity": "Common", "timestamp": "8/25/2024 13:50:20" }, { "title": "CHUNK GOONIES Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/chunk-goonies-minibadge-front.png", "backImageUrl": "images/2024/chunk-goonies-minibadge-back.png", "description": "Chunk is a a longrunning fan of the Goonies.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Ask him for a piece of the treasure!", "rarity": "Super Rare", "timestamp": "8/25/2024 14:24:09" }, { "title": "The Mightiest Ficus", "author": "Mightyficus", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-mightiest-ficus-front.png", "backImageUrl": "images/2024/the-mightiest-ficus-back.png", "description": "This is my eponymous ficus, and the first badge I've ever designed. If you trade me with something cool, I'll give you a sticker too!", "specialInstructions": "", "solderingInstructions": "Solder using the single pad method. It will come with one green LED and one 51 Ohm resistor. The LED goes in the middle, and the resistor is on the side", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or Bribe me with something cool", "rarity": "Super Rare", "timestamp": "8/26/2024 8:44:42" }, { "title": "SAINTSays", "author": "Durkinza", "profilePictureUrl": "", "frontImageUrl": "images/2024/saintsays-front.png", "backImageUrl": "images/2024/saintsays-back.png", "description": "The badge has a pattern matching game and will display your high score as you walk around so all can see your awesome stack trace memorizing skills.", "specialInstructions": "", "solderingInstructions": "I wanted to learn how to make a badge, and I liked the idea of making the badge functional like a game.\nThere are 4 1206 LEDs of varying colors and 4 1206 resistors. \nThe value of the resistors depends on how bright you want each color.\nThe chip on the back is an ATTINY84a.\nThe making of: https://zanedurk.in/saintsays-mini-badge/\nSoldering steps: https://zanedurk.in/soldering-the-saintsays-mini-badge/\nCode/KiCad files: https://github.com/durkinza/SaintSays-MiniBadge", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Durkinza around the conference and offer to trade for it.", "rarity": "Super Rare", "timestamp": "8/29/2024 10:54:55" }, { "title": "RFID Community Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/rfid-community-minibadge-front.png", "backImageUrl": "images/2024/rfid-community-minibadge-back.png", "description": "Come and visit our community to discover how short range wireless communication through RFID works, and how you can take advantage of it, or secure it.\n\nWe can help you explore the various tools and techniques that can be used to read/store/replay/sniff/scan/bruteforce RFID systems.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in our community!", "rarity": "Rare", "timestamp": "8/30/2024 21:40:34" }, { "title": "RFID CTF Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/rfid-ctf-minibadge-front.png", "backImageUrl": "images/2024/rfid-ctf-minibadge-back.png", "description": "Immediately start from nothing as you play through a CTF that steps you through challenges geared from a beginner with zero knowledge, to a more advanced user.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder on the chip carefully using the drag method to minimize pin bridging.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \nSolder the button on the top.\n• Solder the 4x 2-Position headers.\"", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in our CTF and explore the exciting world of RFID.", "rarity": "Rare", "timestamp": "8/30/2024 22:01:47" }, { "title": "Lan Party Event Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/lan-party-event-minibadge-front.png", "backImageUrl": "images/2024/lan-party-event-minibadge-back.png", "description": "We’ll have a variety of games available, including StarCraft, Cursed Halo, Battlefield 1942, Minecraft, Overwatch 2, League of Legends, Rocket League, PayDay 2, and others. And if there’s a particular game you’d like to play, let us know during the LAN Party and we’ll make a way for us to vote on new games.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Event", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come get your LAN on, and experience this classic event.\nLAN Party – Bring your rigs!", "rarity": "Rare", "timestamp": "8/30/2024 22:07:36" }, { "title": "On Wednesdays We Wear Pink!", "author": "ShadowC1oud", "profilePictureUrl": "", "frontImageUrl": "images/2024/on-wednesdays-we-wear-pink-front.png", "backImageUrl": "images/2024/on-wednesdays-we-wear-pink-back.png", "description": "I enjoy standing out in a crowd and being bold enough to wear pink. Hoping this badge could be fun for others who enjoy their uniqueness, or common interest in the color Pink.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LEDs first, using the single-pad method for hand soldering.\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me, I'll be wearing pink. Trade with me, or wear something pink. Bonus points if you wear pink on Wednesday!", "rarity": "Rare", "timestamp": "8/31/2024 3:42:02" }, { "title": "Lockpick Community Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/lockpick-community-minibadge-front.png", "backImageUrl": "images/2024/lockpick-community-minibadge-back.png", "description": "\"Lock Picking is a security “right of passage”. Your journey begins here!\n\nWhether you are new or experienced with lock picking, the Lock Picking Community is a must stop. This is a great skill to help you learn about physical security and that everything has vulnerabilities. We will have lock picking instructions, challenges, and plenty of practice time for you to learn and develop your skills. \"", "specialInstructions": "", "solderingInstructions": "• Solder the LEDs first, using the single-pad method for hand soldering. \n• Make sure to solder the LEDS in the indicated spots on the board.\n• Solder the resistor using the single-pad method for hand soldering. \n• Solder the Pin Headers to the Badge in the 4 corners only. \n• The additional 2 center pins are for belts you earn along the way.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and Level up in the lockpicking community. As you Level up your skills, this badge has replaceable belts that will take you thorough the lockpick belt system. See how far you can level up while your at the CON!", "rarity": "Common", "timestamp": "8/31/2024 9:14:04" }, { "title": "Hallway Talks Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/hallway-talks-minibadge-front.png", "backImageUrl": "images/2024/hallway-talks-minibadge-back.png", "description": "Hallway talks were started to give insight into all the incredible effort that makes SAINTCON a success for all involved. We post videos of interviews and behind the scenes content of all things Saintcon!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Event", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find us in the hallways, and ask us for one of these neat badges... Because... We want to talk!", "rarity": "Rare", "timestamp": "9/2/2024 11:35:21" }, { "title": "Saintcon Store Official Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/saintcon-store-official-minibadge-front.png", "backImageUrl": "images/2024/saintcon-store-official-minibadge-back.png", "description": "The Saintcon store is an official staple of the con. The store grows every year with more and more amazing products and sponsored products from some of the best in the business.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Official", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Free with purchase while supplies last!", "rarity": "Common", "timestamp": "9/2/2024 11:50:36" }, { "title": "Homelabs Community Minibadge", "author": "bfcoder", "profilePictureUrl": "", "frontImageUrl": "images/2024/homelabs-community-minibadge-front.png", "backImageUrl": "images/2024/homelabs-community-minibadge-back.png", "description": "Home Labs is a community of IT professionals and hobbyists who sharpen their skills for their $dayjob while building cool stuff at home.\n\nThis community will be a space where you can talk about projects you are working on, work on – or better yet submit – some lab guides of cool solutions you have built, check out awesome demos, and join in with your fellow dumpster-diving hardware enthusiasts.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate to get one of these unique Minibadges.", "rarity": "Rare", "timestamp": "9/2/2024 12:01:17" }, { "title": "Checkpoint Security Saintcon Official Sponsor Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/checkpoint-security-saintcon-official-sponsor-minibadge-front.png", "backImageUrl": "images/2024/checkpoint-security-saintcon-official-sponsor-minibadge-back.png", "description": "Protect What Matters Most!\n\nOur Infinity Platform delivers AI-powered and cloud-delivered cyber security across your entire enterprise: network, cloud, and workspace.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering.\n• Solder the jumper. (Pads at the bottom.) Either both of the right pads to make the badge blink or solder both of the left pads together to have the LED stay solid on.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our booth and learn how we can help you protect what matters most!", "rarity": "Rare", "timestamp": "9/2/2024 12:10:15" }, { "title": "Compunet Official Saintcon Sponsor Badge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/compunet-official-saintcon-sponsor-badge-front.png", "backImageUrl": "images/2024/compunet-official-saintcon-sponsor-badge-back.png", "description": "Compunet provides seamless audio and visual solutions to facilitate efficient meetings and communications. Systems are specifically designed for your unique space. Our team of highly skilled engineers take the lead in designing, developing, and implementing solutions that address complex business challenges.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our boot and chat about our partners and the many solutions we offer!", "rarity": "Uncommon", "timestamp": "9/2/2024 12:29:09" }, { "title": "Forescout Official Sponsor Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/forescout-official-sponsor-minibadge-front.png", "backImageUrl": "images/2024/forescout-official-sponsor-minibadge-back.png", "description": "The Forescout Advantage:\n\nForescout is the only automated cybersecurity company that continuously identifies, protects and ensures the compliance of all managed and unmanaged assets – IT, IoT, IoMT and OT – so you can more effectively manage cyber risk and mitigate threats.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering.\n• Solder the jumper. (Pads at the bottom.) Either both of the right pads to make the badge blink or solder both of the left pads together to have the LED stay solid on.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our booth and chat about how Forescout can help you secure your IOT devices.", "rarity": "Rare", "timestamp": "9/2/2024 12:38:37" }, { "title": "Healthcare Hacking Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/healthcare-hacking-community-minibadge-front.png", "backImageUrl": "images/2024/healthcare-hacking-community-minibadge-back.png", "description": "Health Care devices need to be hacked too. Join us!\nThe Health Care Hacking Community is a location for conference attendees to gather to learn and share information on the state of health care cybersecurity and how it intersects with personal health.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come visit our community and Hack varios healthcare devices.", "rarity": "Rare", "timestamp": "9/2/2024 12:50:51" }, { "title": "CTF Blue Team Style Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/ctf-blue-team-style-minibadge-front.png", "backImageUrl": "images/2024/ctf-blue-team-style-minibadge-back.png", "description": "Welcome to the Capture the Flag game designed to hone your skills on the blue team side of cybersecurity. This challenge is crafted to test your proficiency in areas such as digital forensics, network forensics, malware analysis, hashing/encryption, threat intelligence, OSINT, scripting, and more! Whether you’re a seasoned cybersecurity professional or a curious beginner, this game promises to engage and challenge all participants.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and unravel the who, what, when, where, and why of a cyber-attack.", "rarity": "Rare", "timestamp": "9/2/2024 12:58:30" }, { "title": "So You've Been Hacked? Contest Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/so-youve-been-hacked-contest-minibadge-front.png", "backImageUrl": "images/2024/so-youve-been-hacked-contest-minibadge-back.png", "description": "Welcome to So You’ve Been Hacked?, a SAINTCON’s blue team contest. In this unique challenge, you will step into the shoes of a corporate security team facing a nightmare scenario: a critical alert indicating a critical developer’s laptop has been compromised during routine development work. With the clock ticking and the pressure on, your mission is to navigate through the incident response process to halt the breach.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in this contest!", "rarity": "Rare", "timestamp": "9/2/2024 13:04:46" }, { "title": "VLCM Official Saintcon Sponsor Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/vlcm-official-saintcon-sponsor-minibadge-front.png", "backImageUrl": "images/2024/vlcm-official-saintcon-sponsor-minibadge-back.png", "description": "\"We could not be more excited to have VLCM back again this year and partner with us at this level. Their Minibadge design is of a rabid ferret, which is\nValcom’s Cybersecurity mascot.\"", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come chat with us about our great solutions!", "rarity": "Common", "timestamp": "9/2/2024 13:15:18" }, { "title": "Lan Cable Contest Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/lan-cable-contest-minibadge-front.png", "backImageUrl": "images/2024/lan-cable-contest-minibadge-back.png", "description": "Build a LAN Cable, as fast as you can!\nHave you ever built your own network cable? Maybe you’re a cable-making veteran and never want to crimp a network cable again… or maybe you’ve never even tried. Whatever you’re inclination you can at least try it once! Get ready to unleash or learn mad network cable crimping skills and test your RJ-45 crimping prowess in the LAN cable contest!", "specialInstructions": "", "solderingInstructions": "• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.\nThen hone your cable making skills by puttin an end on a cable, looping it through the minibadge and then putting the other end on, making the shortest loop possible!", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Give the lan cable contest a try.", "rarity": "Rare", "timestamp": "9/2/2024 13:25:46" }, { "title": "Provo City", "author": "Master Mapper", "profilePictureUrl": "", "frontImageUrl": "images/2024/provo-city-front.jpg", "backImageUrl": "images/2024/provo-city-back.jpg", "description": "Now that you are enjoying Saintcon in Provo, you definitely need to get one of these to add to your collection. This is part of the Provo City logo.", "specialInstructions": "", "solderingInstructions": "Solder the LED first, using the single pad method for hand soldering.\nSolder the resistor using the single pad method for hand soldering.\nSolder the Pin headers to the badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Several people will have them to trade or give away, just ask. Some will also be at the Vault Challenge area.", "rarity": "Uncommon", "timestamp": "9/3/2024 9:26:34" }, { "title": "TREND MICRO Saintcon Sponsor Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/trend-micro-saintcon-sponsor-minibadge-front.png", "backImageUrl": "images/2024/trend-micro-saintcon-sponsor-minibadge-back.png", "description": "Trend Micro is here again as one of our amazing sponsors of Saintcon this year. Trusted by 500,000 Trend Micro customers globally to swiftly detect and respond to threats. Better understand, communicate and mitigate cyber risk across your enterprise with Trend.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "You can obtain this badge by visiting their booth and interacting with any of their staff.", "rarity": "Uncommon", "timestamp": "9/3/2024 20:51:05" }, { "title": "Ham Radio Community Minibadge", "author": "Ray-Man & Redactd", "profilePictureUrl": "", "frontImageUrl": "images/2024/ham-radio-community-minibadge-front.png", "backImageUrl": "images/2024/ham-radio-community-minibadge-back.png", "description": "Ham Radio has been considered to be the original group of hackers, launching before computers, integrated circuits, and even the transistor! Hams of all generations have a hacker mindset, solving problems their own way, regardless of what the manual has to say. Continuing this pioneer spirit, the Ham Radio Community is here to support advancement of the hobby with a cybersecurity slant.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and visit our community and tell us your handle!", "rarity": "Uncommon", "timestamp": "9/3/2024 20:56:10" }, { "title": "\"THE KEEP\" Community Minibadge", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-keep-community-minibadge-front.png", "backImageUrl": "images/2024/the-keep-community-minibadge-back.png", "description": "Your quest begins here! Hone your hacking skills and put them to the test.\nThe Keep is a fun and educational environment where you can both learn the fundamentals of hacking and test your abilities in a realistic environment. Whether you are a beginner or an expert hacker, there are opportunities for you to learn new things and challenge yourself.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the Pin-headers.\n\nThroughout your quest you may get pieces of armor or weapons that solder to the sides of your badge.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Bring a laptop, and come participate in \"THE KEEP\".", "rarity": "Common", "timestamp": "9/4/2024 17:05:22" }, { "title": "ID/IOT Community Minibadge", "author": "Spectre", "profilePictureUrl": "", "frontImageUrl": "images/2024/id-iot-community-minibadge-front.png", "backImageUrl": "images/2024/id-iot-community-minibadge-back.png", "description": "Industrial Devices and IoT together make an interesting challenge you should explore.\nThe IDIOTs are BACK!\n\nRemember last year? When you heard about the fragility of control systems and the cyber security problems they face? Whether the threats are from vulnerable PLCs to protocols that lack authentication, or proprietary protocols where there is little to no documentation, these systems are becoming more and more notorious for their security vulnerabilities.", "specialInstructions": "", "solderingInstructions": "1206 LED\n0805 RESISTOR\nFR4 PCB\n2-Pin Pin Headers", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and participate in our community.", "rarity": "Rare", "timestamp": "9/4/2024 17:15:40" }, { "title": "Supertechguy Personal Badge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/supertechguy-personal-badge-front.png", "backImageUrl": "images/2024/supertechguy-personal-badge-back.png", "description": "Do you know supertech guy? Do you want to? Of course you do!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering.\n• Solder the jumper. (Pads at the bottom.) Either both of the right pads to make the badge blink or solder both of the left pads together to have the LED stay solid on.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade him something cool for one of these badges!", "rarity": "Rare", "timestamp": "9/4/2024 17:24:12" }, { "title": "370 Z Trans", "author": "SynAck", "profilePictureUrl": "", "frontImageUrl": "images/2024/370-z-trans-front.png", "backImageUrl": "images/2024/370-z-trans-back.png", "description": "I thought this would be a cool car badge", "specialInstructions": "", "solderingInstructions": "None", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me", "rarity": "Super Rare", "timestamp": "9/5/2024 9:52:56" }, { "title": "Team Red Minibadge", "author": "klipper", "profilePictureUrl": "", "frontImageUrl": "images/2024/team-red-minibadge-front.png", "backImageUrl": "images/2024/team-red-minibadge-back.png", "description": "A love letter to the greatest tool storage solution on the face of the earth. I thought it'd be fun to incorporate some multi-color 3D printing with my badge art this year. If you have a moment, I'd love to talk to you about tool storage :D", "specialInstructions": "", "solderingInstructions": "Solder the resistor on the back (only one spot for it to go, polarity doesn't matter)\nPlace the glue dot on the bottom of the mini pack-out.\nPush the through whole led through the packout and the glue dot.\nStick the packout assembly to the minibadge\nSolder the LED\nSolder the pins on\nGlue the packout lid on", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and trade me, or ask for one, or do an interpretive dance, tell me you like my hat, bring me a Sugar Free Redbull, share with me your favorite red tool and why.", "rarity": "Uncommon", "timestamp": "9/6/2024 1:05:47" }, { "title": "ID10T Error", "author": "SynAck", "profilePictureUrl": "", "frontImageUrl": "images/2024/id10t-error-front.png", "backImageUrl": "images/2024/id10t-error-back.png", "description": "After being in IT for many years, I still hear people say this.", "specialInstructions": "", "solderingInstructions": "None", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me on Discord", "rarity": "Rare", "timestamp": "9/6/2024 10:04:11" }, { "title": "PEBCAC", "author": "SynAck", "profilePictureUrl": "", "frontImageUrl": "images/2024/pebcac-front.png", "backImageUrl": "images/2024/pebcac-back.png", "description": "After being in IT for many years, I still hear people say this.", "specialInstructions": "", "solderingInstructions": "None", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me on Discord", "rarity": "Rare", "timestamp": "9/6/2024 10:06:53" }, { "title": "Portable minibadge holder (pendant or earring)", "author": "RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/portable-minibadge-holder-pendant-or-earring-front.png", "backImageUrl": "images/2024/portable-minibadge-holder-pendant-or-earring-back.png", "description": "This is a single minibadge holder that is powered by a 2032 battery. You can use the holes in the top for wire to connect to earring hooks or to a necklace or whatever you would like. It has a clock circuit so it will work with almost all the minibadges and at least light up them all.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/-dMSakdh-0s", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Other", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "SAINTCON store (If not in store then I will have them unless sold out)", "rarity": "Rare", "timestamp": "9/7/2024 20:34:16" }, { "title": "4x4 Minibadge display with MDNC", "author": "RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/4x4-minibadge-display-with-mdnc-front.png", "backImageUrl": "images/2024/4x4-minibadge-display-with-mdnc-back.png", "description": "This is a custom 4x4 display (16 minibadges) for minibadges that is powered by USB-C or the rj45 connector to another 4x4 display which I call the MDNC. This is a complete kit with header helper that works as a stand once complete. Wanted a small display piece to put on a desk and be networkable for unique future projects. It has two separate clock circuits so you can have them the same or different speeds as I include both types of resistors in the kit.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/Nmzs4Ul-mx0", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Other", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "SAINTCON store (DC801 will have a special version of it as well)", "rarity": "Super Rare", "timestamp": "9/7/2024 20:45:17" }, { "title": "2024 Hardware Hacking Community MiniBadge", "author": "RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/2024-hardware-hacking-community-minibadge-front.png", "backImageUrl": "images/2024/2024-hardware-hacking-community-minibadge-back.png", "description": "HHC brings you a new minibadge that brings back some of the puzzle minibadge dynamics in an easier project that also teaches you how to solder. The circuit is a dual transistor flashing circuit to alternate the through hole led with the smd led. This is the minibadge HHC will hand out and use to teach soldering as well. It does have two PCBs that stack to make for a nice art piece.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/sR8GIuKkJxs", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "HHC booth and the learn to solder class", "rarity": "Common", "timestamp": "9/7/2024 20:58:26" }, { "title": "AirJordan Jumpman", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/airjordan-jumpman-front.png", "backImageUrl": "images/2024/airjordan-jumpman-back.png", "description": "This is a tribute to the best basketball player of all time.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to assemble this badge.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or come and find me while they last.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:13:30" }, { "title": "AutoBot Optimus Prime", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/autobot-optimus-prime-front.png", "backImageUrl": "images/2024/autobot-optimus-prime-back.png", "description": "One of my favorite toys as a kid was Transformers. I know this dates me. Optimus Prime was one of my favorite Transformers.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or come and find me while they last", "rarity": "Super Rare", "timestamp": "9/8/2024 21:20:14" }, { "title": "CounterStrike", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/counterstrike-front.png", "backImageUrl": "images/2024/counterstrike-back.png", "description": "CounterStrike is one of my favorite PC games.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:24:38" }, { "title": "Always DNS", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/always-dns-front.png", "backImageUrl": "images/2024/always-dns-back.png", "description": "The issue always relates to DNS!! At least it is always a DNS issue in my office :)", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me", "rarity": "Super Rare", "timestamp": "9/8/2024 21:27:51" }, { "title": "GhostBusters 2", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/ghostbusters-2-front.png", "backImageUrl": "images/2024/ghostbusters-2-back.png", "description": "Last year I designed the GhostBusters badge. This year I had to do the GhostBusters 2 badge.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:30:30" }, { "title": "Joker", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/joker-front.png", "backImageUrl": "images/2024/joker-back.png", "description": "Why so Serious!!!", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:32:41" }, { "title": "Power Cycle", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/power-cycle-front.png", "backImageUrl": "images/2024/power-cycle-back.png", "description": "We all have had users saying things didn't work. This badge is designed for the easy fix.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:35:06" }, { "title": "SuperBee", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/superbee-front.png", "backImageUrl": "images/2024/superbee-back.png", "description": "This is for all the car fanatics especially muscle cars. This is the logo for the Dodge SupeBee and since I own a Dodge Charger SuperBee, (which is 1 of 425 cars made) I wanted to do a MiniBadge with this logo.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or come and find me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:39:18" }, { "title": "Flipper Zero", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/flipper-zero-front.png", "backImageUrl": "images/2024/flipper-zero-back.png", "description": "Here is a minibadge of the infamous Flipper Zero.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:43:29" }, { "title": "Millennium Falcon", "author": "Opie", "profilePictureUrl": "", "frontImageUrl": "images/2024/millennium-falcon-front.png", "backImageUrl": "images/2024/millennium-falcon-back.png", "description": "I love StarWars and I wanted to make a StarWars badge. This is for the ship that made the Kessel Run in under 12 parsecs.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/opie-saintcon-minibadges-2024 for instructions on how to build this and my other minibadges.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "9/8/2024 21:52:46" }, { "title": "UVU 1 of 3", "author": "Fiberhands", "profilePictureUrl": "", "frontImageUrl": "images/2024/uvu-1-of-3-front.png", "backImageUrl": "images/2024/uvu-1-of-3-back.png", "description": "Very simple design with one LED and one Resistor", "specialInstructions": "", "solderingInstructions": "Solder on the surface mount LED, Resistor and pins and that's it.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to a UVU employee.", "rarity": "Uncommon", "timestamp": "9/10/2024 10:36:32" }, { "title": "UVU 2 of 3", "author": "Fiberhands", "profilePictureUrl": "", "frontImageUrl": "images/2024/uvu-2-of-3-front.png", "backImageUrl": "images/2024/uvu-2-of-3-back.png", "description": "designed by a UVU employee. Just for fun", "specialInstructions": "", "solderingInstructions": "Solder on the surface mount LED and resistor and the pins.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to a UVU employee", "rarity": "Uncommon", "timestamp": "9/10/2024 10:46:11" }, { "title": "UVU 3 of 3", "author": "Fiberhands", "profilePictureUrl": "", "frontImageUrl": "images/2024/uvu-3-of-3-front.png", "backImageUrl": "images/2024/uvu-3-of-3-back.png", "description": "Designed by a UVU employee. Just for fun", "specialInstructions": "", "solderingInstructions": "solder on the surface mount LED, resistor and pins,.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to a UVU employee", "rarity": "Uncommon", "timestamp": "9/10/2024 10:51:28" }, { "title": "RE Badge Topper", "author": "Professor Plum", "profilePictureUrl": "", "frontImageUrl": "images/2024/re-badge-topper-front.png", "backImageUrl": "images/2024/re-badge-topper-back.png", "description": "Reverse engineering themed badge topper", "specialInstructions": "", "solderingInstructions": "Solder U1, PY32 micro controller first, note pin 1 location\nSolder D1 & D2, note LED the orientation. The black mark should be towards the bottom\nSolder R1, 100 ohm (101), orientation doesn't matter\nSolder R2, 1M ohm (105), orientation doesn't matter\nSolder C1, 1uF, orientation doesn't matter", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "9/12/2024 14:40:48" }, { "title": "Spider-Man and Venom", "author": "koso2032 & narwhal", "profilePictureUrl": "", "frontImageUrl": "images/2024/spider-man-and-venom-front.png", "backImageUrl": "images/2024/spider-man-and-venom-back.png", "description": "As a long-time Spider-Man fan, I've recently been drawn to the comics. I've been exploring the stories of Venom and Carnage, and the fascinating Spider-Man Venom combo that I experienced in Marvel's Spider-Man 2 video game. This journey into Spider-Man lore has been so captivating that it's even influenced my other hobbies, such as Lego and pinball machines and now with my first mini-badge.", "specialInstructions": "", "solderingInstructions": "56 ohm resistor goes on R1, LED with the green corner(or red sharpie on the front of the disposable LED packaging) goes into D1. \n10 ohm resistor goes on R2, LED with the green line goes into D2.\nWhite should flash through Venom's eye and red should be a solid color led on Spider-Man's side.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade/Ask. I work at UVU so anyone giving out UVU mini-badges will know how to get a hold of me.", "rarity": "Rare", "timestamp": "9/13/2024 15:10:50" }, { "title": "Pumpkin Badge", "author": "HarryHedgehog & ShadowC1oud", "profilePictureUrl": "", "frontImageUrl": "images/2024/pumpkin-badge-front.png", "backImageUrl": "images/2024/pumpkin-badge-back.png", "description": "Fun Pumpkin Badge designed by first time minibage creator Harry Hedgehog. HH loved his first SAINTCON Family night last year and wanted a minibadge to trade with others this year.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LEDs first, using the single-pad method for hand soldering.\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me at family night, any extras will be traded for on HH's behalf at the conference following family night.", "rarity": "Super Rare", "timestamp": "9/14/2024 1:11:30" }, { "title": "Smile Emoji", "author": "HarryHedgehog & ShadowC1oud", "profilePictureUrl": "", "frontImageUrl": "images/2024/smile-emoji-front.png", "backImageUrl": "images/2024/smile-emoji-back.png", "description": "Another design by HarryHedgehog. The smiley faces are meant to bring joy!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED first, using the single-pad method for hand soldering.\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me on Family Night or with my dad (ShadowC1oud) at the conference after family night", "rarity": "Super Rare", "timestamp": "9/14/2024 1:17:55" }, { "title": "Ghosts Badge", "author": "HeiHei & ShadowC1oud", "profilePictureUrl": "", "frontImageUrl": "images/2024/ghosts-badge-front.png", "backImageUrl": "images/2024/ghosts-badge-back.png", "description": "First ever badge designed by HeiHei. She loves Ghosts, Halloween, Rainbows and SAINTCON! (Marked as intermediate only because the LED size is a little smaller than the 1206 size the board was made for. It should still solder fine though)", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED first, using the single-pad method for hand soldering. LED is 0807 while board was designed for 1206, so it is a little smaller than expected but shouldn't cause too much issue when soldering. (Reason for intermediate rating)\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me at Family night or with my dad at the conference after family night.", "rarity": "Super Rare", "timestamp": "9/14/2024 1:27:29" }, { "title": "Pineapple Minibadge", "author": "Hollyhacker & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/pineapple-minibadge-front.png", "backImageUrl": "images/2024/pineapple-minibadge-back.png", "description": "Inspired by the idea of a Wi-FI Pineapple and mapping out networks. (No actual wireless radios included)", "specialInstructions": "", "solderingInstructions": "Standard SMD.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Ask Hollyhacker", "rarity": "Rare", "timestamp": "9/14/2024 10:56:48" }, { "title": "Guy on a Buffalloo-o Minibadge", "author": "R1ppl3 & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/guy-on-a-buffalloo-o-minibadge-front.png", "backImageUrl": "images/2024/guy-on-a-buffalloo-o-minibadge-back.png", "description": "Tribute minibadge to \"The guy on the buffalo.\" (If you know you know. If you dont know, scan the QR code on the back of the badge, so you can know.)", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find R1ppl3 and trade or barter for one of these gems.", "rarity": "Super Rare", "timestamp": "9/14/2024 15:47:06" }, { "title": "Green Jello Badge", "author": "The Green Jello Group", "profilePictureUrl": "", "frontImageUrl": "images/2024/green-jello-badge-front.jpg", "backImageUrl": "images/2024/green-jello-badge-back.jpg", "description": "From the beginning, this mini badge was designed to give everyone a 'taste' of Utah-culture (this is NOT real Jello, DO NOT eat it). You can't call yourself a real Utahn until you've had green Jello with carrot shavings (you don't have to like it, just try it!). So, the next time you're at a family (or a friends' family) party, you can tell grandma you already got some green Jello! And if you end up not liking carrots in green Jello, at least you'll have the soft, green glow of this mini badge to fall asleep to!", "specialInstructions": "", "solderingInstructions": "Solder resistor to pads marked \"R1\" then insert the LED into the hole and bend the leads to fit into the Holes marked \"D1\" (shortest lead goes into the \"square\" hole), if you have to, trim the leads so that they don't stick out beyond the front side of the PCB. Next, place a bead of solder across either of ( NOT BOTH sets) the pads marked \"JP1\" or \"JP2\". Now, solder the pins into the holes at each corner.\n\nIf your jello cube comes off the PCB, please find r0gu3bull3t and she'll glue it back on.\n\nAssembly Video: https://youtu.be/uolf8lIEO5c?si=cyxh3ek0L54pKwCP", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "1- Do some social engineering to find out who the awesome members of the Green Jello Group are;\n2 - Trade, buy, bribe, flatter one of the GJG members until he/she gives-in.", "rarity": "Rare", "timestamp": "9/19/2024 8:59:11" }, { "title": "HONK-IF-YOUR-HONKI", "author": "Hollyhacker & Honki & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/honk-if-your-honki-front.png", "backImageUrl": "images/2024/honk-if-your-honki-back.png", "description": "Without Honki Saintcon wouldn't happen. In a tribute to her amazing laugh and her amazing ability to do 8 things at once Shifty/Hollyhacker have made this minibadge in tribute of her endless service to all of saintcon and its attendees", "specialInstructions": "", "solderingInstructions": "Standard SMD pad style soldering.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Honki! She is often around registration areas but if you listen closely you can hear laugh to guide you to meeting the amazing Honki!", "rarity": "Rare", "timestamp": "9/21/2024 9:39:51" }, { "title": "Gospel Library", "author": "Hollyhacker", "profilePictureUrl": "", "frontImageUrl": "images/2024/gospel-library-front.png", "backImageUrl": "images/2024/gospel-library-back.png", "description": "This minibadge was designed as a reminder of a daily tool used in my life . It is based on a personal faith belief of the importance of Jesus Christ in my life. It is meant to share an important part of who I am as a designer and person.", "specialInstructions": "", "solderingInstructions": "Basic SMD Pad Soldering Method", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "I did not design this badge for general trading I have a very limited quantity. I have lots of other badges for general trading and sharing. You will need to explicity ask me for this badge. Share a story, thought inspiration, moment, etc. on why it might be special to you.", "rarity": "Super Rare", "timestamp": "9/21/2024 9:49:38" }, { "title": "Proofpoint", "author": "Hollyhacker & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/proofpoint-front.png", "backImageUrl": "images/2024/proofpoint-back.png", "description": "Proofpoint Email Security will keep your email system locked up tight.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED first, using the single-pad method for hand soldering. LED is 0807 while board was designed for 1206, so it is a little smaller than expected but shouldn't cause too much issue when soldering. (Reason for intermediate rating)\n• Solder the resistor using the single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "You can get one of the badges by visiting the proofpoint booth, tracking down Boris, or messaging him on the saintcon Discord PassivlyOffside", "rarity": "Rare", "timestamp": "9/21/2024 9:57:18" }, { "title": "Minions Kevin", "author": "Hollyhacker & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/minions-kevin-front.png", "backImageUrl": "images/2024/minions-kevin-back.png", "description": "Even the 5 year old in our house knows what a minibadge is. When the 5 year old asks why their isn't a Minion minibadge in dads collection. He had to correct that problem.", "specialInstructions": "", "solderingInstructions": "Basic SMD Pad Soldering, I marked it as intermediate because their is quite a few pieces", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Hollyhacker, Trade, Ask me , speak minionese , discord ...", "rarity": "Rare", "timestamp": "9/21/2024 10:02:51" }, { "title": "BB-8", "author": "Hollyhacker & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/bb-8-front.png", "backImageUrl": "images/2024/bb-8-back.png", "description": "Who better than our amazing robot friend who rolls around with ease to bring encouragement and support to our lives.", "specialInstructions": "", "solderingInstructions": "Basic SMD Soldering Pad Method", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find SHITFY/Hollyhacker", "rarity": "Rare", "timestamp": "9/21/2024 10:07:42" }, { "title": "Chief Varonis", "author": "Hollyhacker & SHIFTY & Varonis", "profilePictureUrl": "", "frontImageUrl": "images/2024/chief-varonis-front.png", "backImageUrl": "images/2024/chief-varonis-back.png", "description": "Varonis is the guardian of your Digital assets . Make sure you have them in place to protect your Digital assets", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Visit the Varonis Booth, Find JD , He is also known to wear a full suit that clearly identifies him as crazy ...", "rarity": "Uncommon", "timestamp": "9/21/2024 10:20:24" }, { "title": "The Dapper Minibadge Bowtie", "author": "Hollyhacker & RuShan", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-dapper-minibadge-bowtie-front.jpg", "backImageUrl": "images/2024/the-dapper-minibadge-bowtie-back.jpg", "description": "This amazing bowtie is a standalone display for your minibadges. It's USBC powered, comes with all the fixings strap, back cover, and 95% assembled. That's right no tiny soldering points !!! Solder on your headers and you are ready to go ! We made several reveisions and testing processes to ensure this works well for you. The tie includes a power LED so you always know that your power is working. The bowtie does have limited support for clock designed minibadges some work with it others dont it does not have a traditional clock circuit.", "specialInstructions": "", "solderingInstructions": "This is a 95% Assembled Display !! That's right no tiny soldering points !!! Solder on your headers and you are ready to go !", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Other", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "These bowties will be for sale in the offical Saintcon Store", "rarity": "Super Rare", "timestamp": "9/21/2024 10:53:37" }, { "title": "Michelangelos's 12", "author": "Jim Stewart", "profilePictureUrl": "", "frontImageUrl": "images/2024/michelangeloss-12-front.png", "backImageUrl": "images/2024/michelangeloss-12-back.png", "description": "Michelangelos's 12 Personal Minibadge", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go find JLS3 and trade or barter for one of these!", "rarity": "Rare", "timestamp": "9/30/2024 17:03:38" }, { "title": "ID10T Error Minibadge", "author": "Andy T Bandy", "profilePictureUrl": "", "frontImageUrl": "images/2024/id10t-error-minibadge-front.png", "backImageUrl": "images/2024/id10t-error-minibadge-back.png", "description": "ID10T: What is it & How to Fix It... Well... You cant.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the Pin-headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go find Andy and trade or barter for one of these.", "rarity": "Rare", "timestamp": "9/30/2024 17:16:19" }, { "title": "Wee Woo", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/wee-woo-front.png", "backImageUrl": "images/2024/wee-woo-back.png", "description": "Wee woo wee woo he do da - Homage to the Police.... and ALOT of tik-tok memes.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go and find Jup1t3r in the Minibadge trading space!", "rarity": "Rare", "timestamp": "9/30/2024 17:47:05" }, { "title": "STAR WARS VADER Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/star-wars-vader-minibadge-front.png", "backImageUrl": "images/2024/star-wars-vader-minibadge-back.png", "description": "The 1st LED filament minibadge to hit Saintcon is the VADER badge. This badge first made its appearance in 2022, and is back by popular demand.", "specialInstructions": "", "solderingInstructions": "Scan the QR code below to watch the offial assembly video.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go and find Jup1t3r at the official Minibadge trading space.", "rarity": "Uncommon", "timestamp": "9/30/2024 18:01:04" }, { "title": "Night of the Evil AI Expansion Board", "author": "DistinctM1nd", "profilePictureUrl": "", "frontImageUrl": "images/2024/night-of-the-evil-ai-expansion-board-front.png", "backImageUrl": "images/2024/night-of-the-evil-ai-expansion-board-back.png", "description": "This is based on the Night of the Living Dead. I thought of it when I saw mention of \"evil AI\" on the Saintcon badge github this year. It has an Attiny814 microcontroller and can be programmed via UPDI. It has 17 addressable LEDs and will come programmed with several LED modes. It will hold 8 minibadges and 2 SAOs. The minibadges are compliant with the version 2 standard (https://github.com/lukejenkins/minibadge) and the SAOs are compliant with the 1.69bis standard. This will come with a special set of minibadges that are designed to compliment the artwork.", "specialInstructions": "", "solderingInstructions": "The expansion board will come mostly pre-assembled. You'll need to solder the minibadge headers and SAO connectors. There might be one minibadge that is hard; the rest should be easy to intermediate.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me on discord or find me at the conference", "rarity": "Super Rare", "timestamp": "9/30/2024 18:30:54" }, { "title": "Night of the Evil AI Klip-On", "author": "DistinctM1nd", "profilePictureUrl": "", "frontImageUrl": "images/2024/night-of-the-evil-ai-klip-on-front.png", "backImageUrl": "images/2024/night-of-the-evil-ai-klip-on-back.png", "description": "This is based on the Night of the Living Dead. I thought of it when I saw mention of \"evil AI\" on the Saintcon badge github this year. It has an Attiny412 microcontroller and can be programmed via UPDI. It has 9 addressable LEDs and will come programmed with several LED modes. It will hold 3 minibadges. The minibadges are compliant with the version 2 standard (https://github.com/lukejenkins/minibadge) and two of them are game minibadges. This badge also has 2 GPIO pins available for your own development.", "specialInstructions": "", "solderingInstructions": "This badge will come mostly assembled. You'll need to solder the minibadge headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me on discord or find me at the conference.", "rarity": "Super Rare", "timestamp": "9/30/2024 18:40:51" }, { "title": "Krampus", "author": "DistinctM1nd", "profilePictureUrl": "", "frontImageUrl": "images/2024/krampus-front.png", "backImageUrl": "images/2024/krampus-back.png", "description": "This badge has a hidden message, see if you can find it!", "specialInstructions": "", "solderingInstructions": "The instructions for this are here: https://github.com/distinctm1nd/krampus_minibadge_2023", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Contact me on discord or find me at the conference", "rarity": "Super Rare", "timestamp": "9/30/2024 18:48:13" }, { "title": "Vilya", "author": "TheTrollGod", "profilePictureUrl": "", "frontImageUrl": "images/2024/vilya-front.png", "backImageUrl": "images/2024/vilya-back.png", "description": "Vilya, also known as the Ring of Sapphire, the Blue Ring, or the Ring of Air, was one of the Rings of Power made by the Elves of Eregion. It was one of the Three Rings of the Elves created by Celebrimbor, along with Narya and Nenya.", "specialInstructions": "", "solderingInstructions": "Match the resistor colors and LED colors together. Make sure to group the colors to one side or the other\nI.E. Green highlighted components are soldered to the left side pads", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter with me at the minibadge trading space.", "rarity": "Rare", "timestamp": "9/30/2024 20:49:05" }, { "title": "Arcticus", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/arcticus-front.png", "backImageUrl": "images/2024/arcticus-back.png", "description": "", "specialInstructions": "", "solderingInstructions": "Solder 10 Ω resistor(s) to R1 & R2\nSolder Blue LED to D1 & D2\nSolder White LED to D3\nSolder Jumper to either Flash or Solid\nCut header PIN(s) as needed\nSolder PIN(s) to board\nOPTIONAL Cover LEDs with Hot Glue as a diffuser", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me\nJust ask for one", "rarity": "Rare", "timestamp": "9/30/2024 21:01:07" }, { "title": "Arctic Wolf", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/arctic-wolf-front.png", "backImageUrl": "images/2024/arctic-wolf-back.png", "description": "2024's Sponsor badge for Arctic Wolf", "specialInstructions": "", "solderingInstructions": "Solder 10 Ω resistor to R1\nSolder LED to D1 & D2\nCut header PIN(s) to size as needed\nSolder Tall PIN(s) into bottom Vias of bottom and top boards (Ensure solder penetration of all Vias)\nSolder Regular PIN(s) into top Vias\nSolder Jumper to either Flash or Solid", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Stop by our Booth\nTalk/Trade with Arctic Wolf employee\nJust ask me for one", "rarity": "Uncommon", "timestamp": "9/30/2024 21:06:55" }, { "title": "Howling Wolf (Arctic Wolf)", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/howling-wolf-arctic-wolf-front.png", "backImageUrl": "images/2024/howling-wolf-arctic-wolf-back.png", "description": "The howling wolf of Arctic Wolf; is part of a set (potentially 100 complete sets)", "specialInstructions": "", "solderingInstructions": "Solder 10 Ω resistor to R1 & R2\nSolder White LED to D5 & D6\nSide Mount/Solder Blue LED to D7 Blue\nCut header PIN(s) to size as needed \nSolder PIN(s) to board\nSolder Jumper to either Flash or Solid\nOPTIONAL Cover LEDs with Hot Glue as a diffuser", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to an Arctic Wolf employee; do a trick or provide a trade", "rarity": "Super Rare", "timestamp": "9/30/2024 21:14:18" }, { "title": "Letter A (Arctic Wolf)", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/letter-a-arctic-wolf-front.png", "backImageUrl": "images/2024/letter-a-arctic-wolf-back.png", "description": "The letter A of of Arctic Wolf; is part of a set (potentially 100 complete sets)", "specialInstructions": "", "solderingInstructions": "Solder 10 Ω resistor to R1\nSolder Blue LED to D1 & D2\nCut header PIN(s) to size as needed\nSolder PIN(s) to board\nSolder Jumper to either Flash or Solid\nOPTIONAL Cover LEDs with Hot Glue as diffuser", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to an Arctic Wolf employee; do a trick or provide a trade", "rarity": "Super Rare", "timestamp": "9/30/2024 21:18:15" }, { "title": "Letter W (Arctic Wolf)", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/letter-w-arctic-wolf-front.png", "backImageUrl": "images/2024/letter-w-arctic-wolf-back.png", "description": "Letter W of Arctic Wolf; is part of a set (potentially 100 complete sets)", "specialInstructions": "", "solderingInstructions": "Solder 10 Ω resistor to R2\nSolder Blue LED to D3 & D4\nCut header PIN(s) to size as needed\nSolder PIN(s) to board\nSolder Jumper to either Flash or Solid\nOPTIONAL Cover LEDs with Hot Glue as diffuser", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk to an Arctic Wolf employee; do a trick or provide a trade", "rarity": "Super Rare", "timestamp": "9/30/2024 21:21:22" }, { "title": "Cybermen", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/cybermen-front.png", "backImageUrl": "images/2024/cybermen-back.png", "description": "Upgrade or you will be deleted", "specialInstructions": "", "solderingInstructions": "Solder 150 Ω resistors to the right-side column (The pads outlined / highlighted in RED)\nSolder 10 Ω resistors to the left-side column\nSolder Red LEDs to D1 & D2 \nSolder Blue LED to D3 \nSolder White LED to D4\nCut header PIN(s) to size as needed\nSolder PIN(s) to board\nSolder Jumper to either Flash or Solid\nOPTIONAL Cover LEDs with Hot Glue as a diffuser", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me\nJust ask for one", "rarity": "Rare", "timestamp": "9/30/2024 21:26:19" }, { "title": "Dalek", "author": "Cyberm3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/dalek-front.png", "backImageUrl": "images/2024/dalek-back.png", "description": "Exterminate Exterminate", "specialInstructions": "", "solderingInstructions": "Solder 150 Ω resistor to the vertical resistor pad (Pad outlined / highlighted in RED)\nSolder 10 Ω resistor to the horizontal pad (Pad below D4)\nSolder Red LEDs to D1 & D2\nSolder Blue LED to D3", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me\nJust ask for one", "rarity": "Rare", "timestamp": "9/30/2024 21:30:28" }, { "title": "USU Big Blue", "author": "TACOCAT", "profilePictureUrl": "", "frontImageUrl": "images/2024/usu-big-blue-front.png", "backImageUrl": "images/2024/usu-big-blue-back.png", "description": "The USU Big Blue logo in minibadge form", "specialInstructions": "", "solderingInstructions": "", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "9/30/2024 21:37:04" }, { "title": "The Great Owl", "author": "TACOCAT", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-great-owl-front.png", "backImageUrl": "images/2024/the-great-owl-back.png", "description": "Designed this for a friend and thought I'd do a very limited run of it for saintcon. This is a big minibadge 100x80 mm.", "specialInstructions": "", "solderingInstructions": "For the filaments the dots on the board line up with the holes on the solderable part of the filaments. I will include a 10 and 100 ohm resistor with these and you can do either one depending on how bright you want the swords to be.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "9/30/2024 21:40:48" }, { "title": "STAR WARS SKYWALKER Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/star-wars-skywalker-minibadge-front.png", "backImageUrl": "images/2024/star-wars-skywalker-minibadge-back.png", "description": "The SKYWALKER Minibadge will be super-rare. They are intended for Jup1t3r to give\nto people who have made significant contributions to the conference. So if you see someone wearing this one around, you can safely thank them for working Hard to make SAINTCON a success.", "specialInstructions": "", "solderingInstructions": "This is simuilar to the VADER badge in assembly. Scan the QR code on the VADER badge for general instructions.", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "These are not for general circulation. Only availble while supplies last.", "rarity": "Super Rare", "timestamp": "10/1/2024 5:45:25" }, { "title": "Social Engineering Community Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/social-engineering-community-minibadge-front.png", "backImageUrl": "images/2024/social-engineering-community-minibadge-back.png", "description": "Social engineering community is here for the frist time at SAITNCON. Come test your social engineering skills!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Community", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and visit our community!", "rarity": "Common", "timestamp": "10/1/2024 6:03:00" }, { "title": "Hyatt Place Provo Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/hyatt-place-provo-minibadge-front.png", "backImageUrl": "images/2024/hyatt-place-provo-minibadge-back.png", "description": "Special thanks to the Hyatt Place Provo for hosting us again this year.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Availble only to those that are staying there.", "rarity": "Uncommon", "timestamp": "10/1/2024 6:09:53" }, { "title": "Aang head", "author": "bfcoder", "profilePictureUrl": "", "frontImageUrl": "images/2024/aang-head-front.png", "backImageUrl": "images/2024/aang-head-back.png", "description": "I just think Avatar the last air bender is a great show. Wanted to do a neat glowing Aang head out of respect for the show.", "specialInstructions": "", "solderingInstructions": "Starting on the back, solder on the resistor in the top left. Next solder on the LED in the middle. The left side is negative. Flip it over and solder the header pins in place.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or ask for one.", "rarity": "Uncommon", "timestamp": "10/1/2024 19:53:39" }, { "title": "STAR WARS R2D2 Minibadge", "author": "Berly & Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/star-wars-r2d2-minibadge-front.png", "backImageUrl": "images/2024/star-wars-r2d2-minibadge-back.png", "description": "R2-D2 is courageous, comic, and a skilled technician. He communicates with beeps, chirps, squeals, and head spins.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the Pin-headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "As one of the coolest Minibadge Designs of this years con, these will go fast! Go find Berly to claim yours.", "rarity": "Uncommon", "timestamp": "10/1/2024 20:20:58" }, { "title": "STAR WARS Jawa Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/star-wars-jawa-minibadge-front.png", "backImageUrl": "images/2024/star-wars-jawa-minibadge-back.png", "description": "A continuation of the Star War Series of badges.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• You will need to carefully bend the THT LED's at a 90 Degree angle, push then through the holes and trim them a bit before soldering to the pads.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the Pin-headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go find Jup1t3r at the Minibadge Trading space to get one of these!", "rarity": "Uncommon", "timestamp": "10/1/2024 20:34:53" }, { "title": "Kicad Enthusiast", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/kicad-enthusiast-front.png", "backImageUrl": "images/2024/kicad-enthusiast-back.png", "description": "Do you love Kicad as much as we do? A tribute to the free open source we use to make the many great Minibadges for the con.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• You will need to bend the THT led at a 90 Degree angle, poke through the hole and trim the leads before soldering to the pads. \n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Go find Jup1t3r at the Minibadge trading space.", "rarity": "Uncommon", "timestamp": "10/1/2024 20:46:13" }, { "title": "Pali Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/pali-minibadge-front.png", "backImageUrl": "images/2024/pali-minibadge-back.png", "description": "You know me as the \"Guy that runs the Saintcon Store.\"", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and trade for one of these!", "rarity": "Rare", "timestamp": "10/1/2024 20:50:54" }, { "title": "Mach1", "author": "PB&J", "profilePictureUrl": "", "frontImageUrl": "images/2024/mach1-front.png", "backImageUrl": "images/2024/mach1-back.png", "description": "I love sports & muscle cars & most things that go fast. I also like to keep data safe. I just wish that I could drive to the scene of every data-security breach or file restoration event that I have to deal with in a car as awesome as a '72 Mach1.", "specialInstructions": "", "solderingInstructions": "Watch my video first.\nSolder the 750 Ohm resistors and then the 221 Ohm, then the 51 Ohm resistor. Now, solder D1 and D2 (orange LEDs) upside down, then the white ones (D3 & D4), also upside down. Then, solder D5 (it should be marked w/orange on the back of the package) either on its' side or right side up and run a bead of hot glue from D5 to both rectangles (the grill lights) between D3 & D4. Next, solder the switch with the slide pointing away from the PCB on the back side of the PCB. Lastly, solder the pins in place & enjoy! https://youtu.be/oGxkVmTob0I", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me & trade something, tell me about your favorite car, whether you ever owned that one or not.", "rarity": "Rare", "timestamp": "10/1/2024 23:54:37" }, { "title": "Real Salt Lake logo", "author": "kfeuz", "profilePictureUrl": "", "frontImageUrl": "images/2024/real-salt-lake-logo-front.png", "backImageUrl": "images/2024/real-salt-lake-logo-back.png", "description": "I'm an RSL fan so I wanted to create a minibadge to reflect that.", "specialInstructions": "", "solderingInstructions": "Solder the led at the location labeled D1. Solder the resistor at the location labeled R1. Solder the header pins. Done!", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or come talk with me about RSL.", "rarity": "Rare", "timestamp": "10/2/2024 1:54:14" }, { "title": "Harry Potter Lumos", "author": "kfeuz", "profilePictureUrl": "", "frontImageUrl": "images/2024/harry-potter-lumos-front.png", "backImageUrl": "images/2024/harry-potter-lumos-back.png", "description": "I'm a Harry Potter fan and wanted to design a minibadge to reflect that.", "specialInstructions": "", "solderingInstructions": "Solder the led at the location labeled D1. Solder the resistor at the location labeled R1. Solder the header pins. Done!", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or come talk to me about Harry Potter.", "rarity": "Rare", "timestamp": "10/2/2024 1:56:42" }, { "title": "Wonka Basic", "author": "1R15H", "profilePictureUrl": "", "frontImageUrl": "images/2024/wonka-basic-front.png", "backImageUrl": "images/2024/wonka-basic-back.png", "description": "Inspired by the Wonka film, trade for a black bag with a 1 in 15 chance of getting the golden ticket!", "specialInstructions": "", "solderingInstructions": "Solder on the resistor and LED.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me. Golden Tickets and Wonka badges or mixed together in opaque baggies. 1 in 15 chance of winning the Golden Ticket.", "rarity": "Uncommon", "timestamp": "10/2/2024 22:46:33" }, { "title": "Wonka Golden Ticket", "author": "1R15H", "profilePictureUrl": "", "frontImageUrl": "images/2024/wonka-golden-ticket-front.png", "backImageUrl": "images/2024/wonka-golden-ticket-back.png", "description": "Inspired by the Wonka film, trade for a black bag with a 1 in 15 chance of getting the golden ticket!", "specialInstructions": "", "solderingInstructions": "Solder on resistor and LED.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me. Golden Tickets and Wonka badges or mixed together in opaque baggies. 1 in 15 chance of winning the Golden Ticket.", "rarity": "Super Rare", "timestamp": "10/2/2024 22:50:44" }, { "title": "Vasion (PrinterLogic)", "author": "1R15H", "profilePictureUrl": "", "frontImageUrl": "images/2024/vasion-printerlogic-front.png", "backImageUrl": "images/2024/vasion-printerlogic-back.png", "description": "Vasion spark!", "specialInstructions": "", "solderingInstructions": "Solder on the resistor and LED.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and tell me any horror stories you have about print servers.", "rarity": "Super Rare", "timestamp": "10/2/2024 22:55:22" }, { "title": "Badge Hog - Vertical", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/badge-hog-vertical-front.png", "backImageUrl": "images/2024/badge-hog-vertical-back.png", "description": "Did you design an amazing minibadge, but it may or may not be larger than the spec and is hogging all of the badge slots? The Badge Hog solves that problem. \n\nThis is a straight passthrough, so whatever capability your badge has, this will have too!", "specialInstructions": "", "solderingInstructions": "Solder the Minibadge Female headers first. \nWhen soldering headers on, its best to put a minibadge on them first before soldering them on.\nThe Single slot where the Badge Hog logo is located is for the male headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Show me the oversized badge your going to use this on. Trade or barter", "rarity": "Super Rare", "timestamp": "10/3/2024 5:37:42" }, { "title": "Moonwalker", "author": "GamingOnTheFloor & SquirrelyStub", "profilePictureUrl": "", "frontImageUrl": "images/2024/moonwalker-front.jpg", "backImageUrl": "images/2024/moonwalker-back.jpg", "description": "Moonwalker, combines two great mysteries: Bigfoot and why we thought putting him under a giant moon would make him harder to find. We designed it to showcase Bigfoot taking a casual nighttime stroll, because even cryptids need their moonlit cardio. It’s a fun nod to those who, like Bigfoot, manage to stay off the radar—whether you're dodging cameras in the woods or avoiding detection in the cyber world. Plus, who wouldn’t want to see Bigfoot showing off his smooth walking skills under a full moon?", "specialInstructions": "", "solderingInstructions": "This badge is really easy to assemble there is one led and one resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "There is a blue one given away by SquirrelyStub and a black one given away by GamingOnTheFloor we have 50 each. To obtain one please trade with one of us or simply ask for one. As the stash gets lower they might get harder to obtain and we may ask you to solve a challenge or riddle.", "rarity": "Super Rare", "timestamp": "10/3/2024 20:49:12" }, { "title": "Unicow", "author": "GamingOnTheFloor & SquirrelyStub", "profilePictureUrl": "", "frontImageUrl": "images/2024/unicow-front.jpg", "backImageUrl": "images/2024/unicow-back.jpg", "description": "Meet our minibadge, Unicow, the only creature at SAINTCON blending cybersecurity with farmyard magic! This fabulous cow, sporting a unicorn horn, reminds us that even in tech, there’s room for silliness. Picture Unicow roaming the digital fields, detecting malware with its magical horn while cracking jokes about “udders” and “debugging.” It’s all about securing the pasture, one hoof at a time!", "specialInstructions": "", "solderingInstructions": "This is very easy there is only one LED and only one resistor", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "See SquirrleyStub and trade with him or just ask for one. There are a limited number of them so as they get lower in number he may ask you to solve a challenge or make him laugh or simply make him feel pretty.", "rarity": "Super Rare", "timestamp": "10/3/2024 21:02:55" }, { "title": "Strong Bad", "author": "bitl!sa", "profilePictureUrl": "", "frontImageUrl": "images/2024/strong-bad-front.jpg", "backImageUrl": "images/2024/strong-bad-back.png", "description": "This is my first minibadge. Older geeks (like me) will recognize Strong Bad from 2001 as a flash video series found online.", "specialInstructions": "", "solderingInstructions": "Solder the LED and resistor on the back of the minibadge", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "I'd love to trade.", "rarity": "Super Rare", "timestamp": "10/4/2024 10:08:54" }, { "title": "BookIt!", "author": "TGalvez & Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/bookit-front.png", "backImageUrl": "images/2024/bookit-back.png", "description": "Your guide to a free personal pizza!\n\nThe badge has nice effect as the two RGB are desynchronized and rainbow.", "specialInstructions": "", "solderingInstructions": "Please visit https://minibadges.zevlag.com/buildguides/Zevlag-Minibadges-2024.pdf for the most updated and prettiest presentation of these instructions.\n\nASSEMBLY INSTRUCTIONS:\n- Begin on the Back side.\n- LED direction indicators are on the image above, and on the board with a box shape.\n- Solder the 2 resistors first.R1 = 10 Ω (1206)R2 = 75 Ω (1206)\n- Solder the 2 LEDs next.D1, D2 = 0807 RGB Slow Flash LED\n- Solder the 2x 2-Position headers on the Front side.\n- For the best illumination effect cover the back window, including LEDs, with a glob of hot glue.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Tuesday. Find TGalvez or Zevlag. Tell us the book you most recently read.", "rarity": "Uncommon", "timestamp": "10/5/2024 17:33:52" }, { "title": "Roll for Initiative", "author": "Derek Gray", "profilePictureUrl": "", "frontImageUrl": "images/2024/roll-for-initiative-front.png", "backImageUrl": "images/2024/roll-for-initiative-back.png", "description": "A minibadge associated with my presentation: Roll for Initiative: Bringing table top RPGs to your Table Top exercises.", "specialInstructions": "", "solderingInstructions": "Super simple:\nSolder the resister and LEDs in place along with the legs, you are good to go.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "attend the presentation, or find me", "rarity": "Uncommon", "timestamp": "10/7/2024 18:37:12" }, { "title": "Naruto", "author": "Derek Gray", "profilePictureUrl": "", "frontImageUrl": "images/2024/naruto-front.png", "backImageUrl": "images/2024/naruto-back.png", "description": "Celebrate your love of Naruto by touting a minibadge emblazoned with the symbol for the Leaf Village.", "specialInstructions": "", "solderingInstructions": "Solder resistors & LEDS as labeled\nslide edge blocks in place on the outer pin sets (reflective side facing in)", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Kid's night or Thursday / Friday find me.", "rarity": "Super Rare", "timestamp": "10/7/2024 20:22:23" }, { "title": "Chicky Nuggies", "author": "Derek Gray", "profilePictureUrl": "", "frontImageUrl": "images/2024/chicky-nuggies-front.png", "backImageUrl": "images/2024/chicky-nuggies-back.png", "description": "Baby Yoda loves nuggies, need I say more", "specialInstructions": "", "solderingInstructions": "Connect per schematic led and resistor", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Kid's night badge or Thursday/ Friday find me and let me know \"what you want\".", "rarity": "Super Rare", "timestamp": "10/7/2024 20:44:25" }, { "title": "Sloopy Kitty", "author": "Derek Gray", "profilePictureUrl": "", "frontImageUrl": "images/2024/sloopy-kitty-front.png", "backImageUrl": "images/2024/sloopy-kitty-back.png", "description": "After a long day of Saintcon, Kitty's gotta crash. an homage to kids after they have a long night of kids night.", "specialInstructions": "", "solderingInstructions": "Just a single LED and resistor per the board", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade at Kids night, or find me on Thursday / Friday. *Friday I'll be wearing the Fred Flintstone shirt", "rarity": "Rare", "timestamp": "10/7/2024 20:53:48" }, { "title": "MASH", "author": "PB&J", "profilePictureUrl": "", "frontImageUrl": "images/2024/mash-front.png", "backImageUrl": "images/2024/mash-back.png", "description": "This time inspiration came from someone else, Mike's Wife. She may have been joking, \nbut since I've been watching M*A*S*H since I was in Jr. High, there was NO way I couldn't do this.", "specialInstructions": "", "solderingInstructions": "Solder the LED to the pads on the left side (when looking at back of the badge) then solder the resistor to the pads on the right side. Make sure the LED is oriented correctly! Solder the pins in place. If the LED is too bright for you, replace the 100 Ohm resistor w/ a 200 to 750 Ohm resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me & trade something, tell me about your favorite episode or scene from MASH or your favorite TV show.", "rarity": "Rare", "timestamp": "10/7/2024 23:46:41" }, { "title": "Hacker Walder Badge Extension", "author": "kfeuz", "profilePictureUrl": "", "frontImageUrl": "images/2024/hacker-walder-badge-extension-front.png", "backImageUrl": "images/2024/hacker-walder-badge-extension-back.png", "description": "Want to show off your Weber State pride? What better way than a Hacker Waldo badge extension!\n\nIs the Saintcon badge too small for you? Try this Hacker Waldo badge extension! It will more than double the size of the badge while still only providing two minibadge slots.", "specialInstructions": "", "solderingInstructions": "Solder the resistors and the leds on the back. Solder the minibadge headers on the front.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "These are available on a first come first serve basis to anyone who wants one", "rarity": "Rare", "timestamp": "10/8/2024 14:32:26" }, { "title": "Porsche", "author": "PB&J", "profilePictureUrl": "", "frontImageUrl": "images/2024/porsche-front.png", "backImageUrl": "images/2024/porsche-back.png", "description": "Likely the only part of a Porsche I'll ever be able to afford! My apologies to all those who know that orange isn't a 'REAL Porsche' color. The prototype board allowed too much light to bleed through and I thought that copper under red would make the red solder-mask look brighter, shinier AND solve the light issue, I was wrong. :(", "specialInstructions": "", "solderingInstructions": "Solder resistor (on the right-hand side of the PCB), then the LED (in the center of the PCB) and then the pins.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "I will trade one of these for: a mini badge; extender; story about your favorite car; food; cash.", "rarity": "Rare", "timestamp": "10/8/2024 15:07:54" }, { "title": "Barad Dur", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/barad-dur-front.png", "backImageUrl": "images/2024/barad-dur-back.png", "description": "Barad Dur from Lord of the Rings. This features a dark tower with red leds and a misty mountain background. The image supplied is red to simulate the way it looks when lit up.", "specialInstructions": "", "solderingInstructions": "This is a simple single resistor and single red led.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade", "rarity": "Rare", "timestamp": "10/8/2024 18:33:56" }, { "title": "NineTailed Fox", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/ninetailed-fox-front.png", "backImageUrl": "images/2024/ninetailed-fox-back.png", "description": "This is an evil depiction of a nine tailed fox. This badge features a red and blue led that clash in the middle to create a hue of purple.", "specialInstructions": "", "solderingInstructions": "Simple smd led and resistor soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade", "rarity": "Rare", "timestamp": "10/8/2024 18:36:46" }, { "title": "Oni Mask", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/oni-mask-front.png", "backImageUrl": "images/2024/oni-mask-back.png", "description": "Japanese inspired Oni mask that glows red. A little hot glue evens out the red glow across the whole badge.", "specialInstructions": "", "solderingInstructions": "Simple soldering of an smd led and resistor", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade", "rarity": "Rare", "timestamp": "10/8/2024 18:39:17" }, { "title": "Slot Car Tester", "author": "Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/slot-car-tester-front.png", "backImageUrl": "images/2024/slot-car-tester-back.png", "description": "Meet the Slot Car Tester!! Have you ever assembled a 10 x 10\nboard, populate it, then a have a few minibadges not light up? “I\nwonder what pins did I mess up? Why isn't this thing working?”\nThis badge tests each possible set of power pins and indicates if\nthey are getting power. Now you can know if that minibadge\nextender doesn't support the clock pin, or if you have a bad\nsolder joint on a ground pin.", "specialInstructions": "", "solderingInstructions": "Begin on the Back side. Solder the 5 Resistors First.\nR1 = 130 Ω (1206) for Red LED R4 = 51 Ω (1206) for Green LED \nR2 = 51 Ω (1206) for Blue LED R5 = 51 Ω (1206) for Orange LED\nR3 = 220 Ω (1206) for Yellow LED \n----------------------------------------------------------------------------------------------------------------------------\n• Solder the 5 LEDs on the front next.\nCar ONE = D1 = 0805 Red LED Car FOUR = D4 = 0805 Green LED \nCar TWO = D2 = 0805 Blue LED Car FIVE = D5 = 0805 Orange LED\nCar THREE = D3 = 0805 Yellow LED\n• LED Direction indicators are on the image above, and on the PCB with the\ncathode to the front of each car. Solder the 4x 2-Position headers on the Front side\nUse: You can reference the legend on the back of the badge to identify what power\npins may not be supported or are not working for each LED that doesn’t light up.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Thursday. Find TGalvez or Zevlag, and trade or barter.\nyou’ve learned while troubleshooting something.", "rarity": "Uncommon", "timestamp": "10/8/2024 18:40:17" }, { "title": "Stormy Dark Wizard", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/stormy-dark-wizard-front.png", "backImageUrl": "images/2024/stormy-dark-wizard-back.png", "description": "This badge extender features thundering dark blue clouds, an illuminated staff top, and a background board glow of red or green (depending on the color requested).", "specialInstructions": "", "solderingInstructions": "Specific assembly instructions are provided. This extender requires special care and attention to led orientation and exposed traces on the board to avoid issues. This will require the soldering of through-hole leds to smd pads and bending them to illuminate the board.", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Extender for extender trades receive first priority. All extender for extender trades are gladly accepted. After extender for extender trades are done, a comparable barter is accepted.", "rarity": "Super Rare", "timestamp": "10/8/2024 18:47:17" }, { "title": "Rental Giant-BlockBuster", "author": "Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/rental-giant-blockbuster-front.png", "backImageUrl": "images/2024/rental-giant-blockbuster-back.png", "description": "In the realm of rentals, two giants stood tall, Blockbuster and Redbox, both destined to fall. Once a bright beacon, Blockbuster's reign, With shelves full of movies, it brought joy and pain. Redbox emerged with its kiosks aglow, Offering movies for just a dollar to go, No lines to endure, A movie in minutes, No late fees looming imminent. Now both are but whispers of times long gone by, So tell me dear reader, as we bid them adieu, Which rental experience did you cherish most true? You must pick just one.", "specialInstructions": "", "solderingInstructions": "• Begin on the Back side.\n• LED Direction indicators are on the image above, and on the PCB with box icon.\n• Solder the 2 resistors first.\nR1 = 22 Ω (1206) for Warm White LEDs \n• Solder the 2 LEDs next.\nD1, D2 = 0805 Warm White LEDs\n• Solder the 2x 2-Position headers on the Front side.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Friday. Find TGalvez or Zevlag. Tell them your choice and suggest something to add to their “To Watch” list.", "rarity": "Rare", "timestamp": "10/8/2024 18:49:03" }, { "title": "Jigsaw Tricycle", "author": "Dirtybird", "profilePictureUrl": "", "frontImageUrl": "images/2024/jigsaw-tricycle-front.png", "backImageUrl": "images/2024/jigsaw-tricycle-back.png", "description": "Ominous jigsaw riding a copper tricycle. This badge glows red and looks very good with a little hot glue on the back to even out the led illumination.", "specialInstructions": "", "solderingInstructions": "Simple smd led and resistor soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade", "rarity": "Rare", "timestamp": "10/8/2024 18:49:52" }, { "title": "Rental Giant-Redbox", "author": "Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/rental-giant-redbox-front.png", "backImageUrl": "images/2024/rental-giant-redbox-back.png", "description": "In the realm of rentals, two giants stood tall, Blockbuster and Redbox, both destined to fall. Once a bright beacon, Blockbuster's reign, With shelves full of movies, it brought joy and pain. Redbox emerged with its kiosks aglow, Offering movies for just a dollar to go, No lines to endure, A movie in minutes, No late fees looming imminent. Now both are but whispers of times long gone by, So tell me dear reader, as we bid them adieu, Which rental experience did you cherish most true? You must pick just one.", "specialInstructions": "", "solderingInstructions": "• Begin on the Back side.\n• LED Direction indicators are on the image above, and on the PCB with box icon.\n• Solder the 2 LEDs first.\nD1, D2 = 0805 Bright White LEDs\n• Solder the 2 resistors next.\nR1 = 22 Ω (1206) for Blue LEDs\n• Solder the 4x 2-Position headers on the Front side.\n• For the best illumination effect cover the back, including LEDs, with globs of hot\nglue.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Friday. Find TGalvez or Zevlag. Tell them your choice and suggest something to add to their “To Watch” list.", "rarity": "Rare", "timestamp": "10/8/2024 18:55:23" }, { "title": "Narya - LOTR Ring of power", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/narya-lotr-ring-of-power-front.png", "backImageUrl": "images/2024/narya-lotr-ring-of-power-back.png", "description": "Narya is one of the rings of power first given to the elves. Narya is described as having the power to inspire others to resist tyranny, domination and despair, as well as having the power (in common with the other Three Rings) to hide the wielder from remote observation (except by the wielder of the One) and giving resistance to the weariness of time.", "specialInstructions": "", "solderingInstructions": "Simple 2 smd led and resistor soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade/ask", "rarity": "Rare", "timestamp": "10/8/2024 18:57:15" }, { "title": "Best Pet - Cats", "author": "Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/best-pet-cats-front.png", "backImageUrl": "images/2024/best-pet-cats-back.png", "description": "In the delightful showdown of cats versus dogs, the choice is like picking your favorite dessert—each has its own sweet charm! (And may overwhelm you in abundance!) Whether you’re drawn to the serene elegance of a cat’s aloof charm or the joyful exuberance of a dog’s boundless energy, or you simply can’t make up your mind, you must now make a choice in the age old debate: Cat or Dog", "specialInstructions": "", "solderingInstructions": "• Begin on the Back side.\n• LED Direction indicators are on the image above, and on the PCB with box icon.\n• Solder the 1 LED1 first.\nD1 = 1206 Green LED\n• Solder the 2 resistors next.\nR1 = 22 Ω (1206) for Green LEDs\n• Cut one set of 1x 2-Position header into 2x 1-Position header\n• Solder the 2x 2-Position, and 2x 1-Position headers on the Front side.\n• For the best illumination effect cover the back, including LED, with a glob of hot\nglue.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Wednesday. Find TGalvez or Zevlag. Tell them your\nchoice with either a ‘meow!’ or a ‘woof!’.", "rarity": "Rare", "timestamp": "10/8/2024 19:01:19" }, { "title": "Best Pet - Dogs", "author": "Zevlag", "profilePictureUrl": "", "frontImageUrl": "images/2024/best-pet-dogs-front.png", "backImageUrl": "images/2024/best-pet-dogs-back.png", "description": "In the delightful showdown of cats versus dogs, the choice is like picking your favorite dessert—each has its own sweet charm! (And may overwhelm you in abundance!) Whether you’re drawn to the serene elegance of a cat’s aloof charm or the joyful exuberance of a dog’s boundless energy, or you simply can’t make up your mind, you must now make a choice in the age old debate: Cat or Dog", "specialInstructions": "", "solderingInstructions": "• Begin on the Back side.\n• LED Direction indicators are on the image above, and on the PCB with box icon.\n• Solder the 2 resistors first.\nR1, R2 = 22 Ω (1206) for Blue LEDs\n• Solder the 2 LEDs next.\nD1, D2 = 0805 Blue LEDs\n• Solder the 4x 2-Position headers on the Front side", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available on Wednesday. Find TGalvez or Zevlag. Tell them your\nchoice with either a ‘meow!’ or a ‘woof!’.", "rarity": "Rare", "timestamp": "10/8/2024 19:03:28" }, { "title": "Deathstar Firing SuperLaser", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/deathstar-firing-superlaser-front.png", "backImageUrl": "images/2024/deathstar-firing-superlaser-back.png", "description": "This is a first rendition of the Deathstar firing its superlaser. This features a long green led that has a shooting effect.", "specialInstructions": "", "solderingInstructions": "The shooting led is hot glued onto the back of the badge and connected to the large pad using very tiny wires.", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Not Available", "rarity": "Super Rare", "timestamp": "10/8/2024 19:04:34" }, { "title": "Smokey Dark Wizard", "author": "Moomoo", "profilePictureUrl": "", "frontImageUrl": "images/2024/smokey-dark-wizard-front.png", "backImageUrl": "images/2024/smokey-dark-wizard-back.png", "description": "This badge features a smokey dark wizard with a green led background.", "specialInstructions": "", "solderingInstructions": "Simple smd led and resistor soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade", "rarity": "Rare", "timestamp": "10/8/2024 19:06:44" }, { "title": "House of Atreides", "author": "SpawnOfHeaven", "profilePictureUrl": "", "frontImageUrl": "images/2024/house-of-atreides-front.png", "backImageUrl": "images/2024/house-of-atreides-back.png", "description": "Personally I wanted to make something from the movie Dune. I thought there would be enough symbols and images unique enough to make a mini-badge out of it so I decided to pick the House of Atreides shield. The symbol is clean and has a strong presence by it self so it made for a cool idea and badge.", "specialInstructions": "", "solderingInstructions": "There are two resisters and two LEDs total. Simply solder the resister (e.g., R1) on the first copper pad labeled 'R1' on the back of the board. Second, solder the second resister (e.g., R2) on the copper pad labeled 'R2' on the back of the board. Once completed, you can then solder the LEDs on to the back of the board with their corresponding labels (e.g., LED).", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "10/8/2024 20:06:32" }, { "title": "Dune", "author": "SpawnOfHeaven", "profilePictureUrl": "", "frontImageUrl": "images/2024/dune-front.png", "backImageUrl": "images/2024/dune-back.png", "description": "I wanted to submit badges to SaintCon that related to each other so I made multiple badges relating to Dune. I thought some of the images from the movie would make for some cool mini-badges so I went for it.", "specialInstructions": "", "solderingInstructions": "There are a total of two resisters and two LEDs. On the back of the board, you will want to place the first resister on the copper pads labeled 'R1'. Second you will want to place the final resister on the other copper pads labeled 'R2'. The two remaining pairs of copper pads without labels are for LEDs.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "10/8/2024 20:18:19" }, { "title": "The Odie Badge (2024)", "author": "odie", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-odie-badge-2024-front.png", "backImageUrl": "images/2024/the-odie-badge-2024-back.png", "description": "Is it like last year's badge? Yes. But it's now in my favorite color, so it's better!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find odie throughout the con to trade.", "rarity": "Rare", "timestamp": "10/9/2024 12:53:16" }, { "title": "A Goofy Movie: Stand Out Tour", "author": "odie", "profilePictureUrl": "", "frontImageUrl": "images/2024/a-goofy-movie-stand-out-tour-front.png", "backImageUrl": "images/2024/a-goofy-movie-stand-out-tour-back.png", "description": "Open up your eyes, take a look at me\nGet the picture fixed in your memory\nI'm driven by the rhythm like the beat of a heart\nAnd I won't stop until I start to stand out\n\nJoin me in my love of this movie with famous musician Powerline!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering.\n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find odie throughout the con to trade.", "rarity": "Rare", "timestamp": "10/9/2024 14:26:04" }, { "title": "Active Directory National Forest", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/active-directory-national-forest-front.png", "backImageUrl": "images/2024/active-directory-national-forest-back.png", "description": "Did you know the highest level logical container in Microsoft Active Directory is a forest? Did you know that National Forests ARE GREAT? Now you can show off your knowledge of BOTH these things in one minibadge! Great for those who would rather be in the mountains but instead have to make authentication work.", "specialInstructions": "", "solderingInstructions": "Solder the resistor and the LED to the back of the badge according to the silkscreen. Solder on legs. Take a moment to imagine that fresh piney scent because the PCB sure don't actually smell like that.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Nubbins and ask. Or maybe he'll find you. Trades preferred but not required.", "rarity": "Rare", "timestamp": "10/9/2024 14:40:00" }, { "title": "Make Computers Sand Again", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/make-computers-sand-again-front.png", "backImageUrl": "images/2024/make-computers-sand-again-back.png", "description": "A minibadge for those who'd prefer to be outside. Let's let the sand be sand and stop making it think.", "specialInstructions": "", "solderingInstructions": "Solder the LED and resistor. Solder the legs. Reflect on whether you like sand or not, and if you feel it's course and rough and irritating.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Ask Rufnubbins to trade. Or if he'll give you one.", "rarity": "Rare", "timestamp": "10/9/2024 15:15:24" }, { "title": "Professional Mac Love", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/professional-mac-love-front.png", "backImageUrl": "images/2024/professional-mac-love-back.png", "description": "Do you have a Mac Pro? Would you Like a Mac Pro? Have you ever wondered if a Mac Pro can grate cheese? Are you an Apple fanperson? Do you like to make fun of Apple fanpeople? If you answered any of these questions, this is the badge for you!", "specialInstructions": "", "solderingInstructions": "Solder things to the board, hopefully according to the notations. It's just so intuitive.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk with Rufnubbins about your views on Apple products, especially $6,000 base price workstations.", "rarity": "Rare", "timestamp": "10/9/2024 15:23:01" }, { "title": "Grouse Noises", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/grouse-noises-front.png", "backImageUrl": "images/2024/grouse-noises-back.png", "description": "Grouse are delicious. I highly recommend eating them.", "specialInstructions": "", "solderingInstructions": "Solder resistor to R1. Solder LED to D1. Solder legs. Go outside.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Talk with Rufnubbins. Trade with Rufnubbins. Hunt with Rufnubbins.", "rarity": "Rare", "timestamp": "10/9/2024 15:27:35" }, { "title": "Sink the Hook", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/sink-the-hook-front.png", "backImageUrl": "images/2024/sink-the-hook-back.png", "description": "Designed for attendee Mars: For those who can't decide if they'd rather be relaxing next to some water or committing cyber crimes. This minibadge features a switch so you can signal to others your current mindset!", "specialInstructions": "", "solderingInstructions": "There are 2 colors of LED. The green LED goes with the 68R0 resistor, the blue with the 27R0 resistor. R1 matches with D1, and R2 matches with D2. It doesn't matter which color is next to which Ph(f)ishing, so you'll have to make that choice! Solder up the LEDs and Resistors. The switch is designed to go on the underside of the badge, but will function if mounted to front. Solder on the legs. Go phishing. Or fishing.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "You'll have to figure out how to get in touch with Mars. They might be on Discord. They might not. Good luck!", "rarity": "Rare", "timestamp": "10/9/2024 15:38:33" }, { "title": "Dumpster Fire", "author": "Rufnubbins", "profilePictureUrl": "", "frontImageUrl": "images/2024/dumpster-fire-front.png", "backImageUrl": "images/2024/dumpster-fire-back.png", "description": "MetaBlue's spirit animal.", "specialInstructions": "", "solderingInstructions": "ctrl+c, ctrl+v", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Give hottest take of any kind to MetaBlue. Or trade. Or both! Let the crazy out!", "rarity": "Rare", "timestamp": "10/9/2024 15:43:42" }, { "title": "DISA", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/disa-front.png", "backImageUrl": "images/2024/disa-back.png", "description": "The Department of Defenses finest Agency; DISA - Defense Information Systems Agency. The trusted provider to connect and protect the warfighter in cyberspace.", "specialInstructions": "", "solderingInstructions": "1. Solder the through-hole LEDs to the D1 & D2 SMD pads.\n\t- The short leg goes inside the box.\n\t- Bend the legs so the LEDs curves in toward the center of the badge.\n2. Solder the resistor using the single-pad method for hand soldering. \n3. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/9/2024 15:48:02" }, { "title": "doTERRA", "author": "kittysedai", "profilePictureUrl": "", "frontImageUrl": "images/2024/doterra-front.png", "backImageUrl": "images/2024/doterra-back.png", "description": "doTERRA, meaning \"gift of the earth\" in Latin, is committed to sharing natural essential oils globally, empowering individuals to take charge of their well-being, one drop at a time.", "specialInstructions": "", "solderingInstructions": "1. Solder the through-hole LED to the D1 SMD pad.\n\t- The short leg goes inside the box.\n\t- Bend the legs so the LED curves in toward the center of the badge.\n2. Solder the resistor using the single-pad method for hand soldering. \n3. Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/9/2024 15:53:30" }, { "title": "Strider1", "author": "Skimice", "profilePictureUrl": "", "frontImageUrl": "images/2024/strider1-front.png", "backImageUrl": "images/2024/strider1-back.png", "description": "I have wanted to learn how to make MiniBadges for years and I finally decided to take the time to learn how. I made three different badges this year that are all tied to my work. That way I could get the help of our design department and have them be work funded!", "specialInstructions": "", "solderingInstructions": "This a very simple badge, attach the resistors, attach the diodes, and attach the headers. Light up and enjoy.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/10/2024 11:43:05" }, { "title": "Strider2", "author": "Skimice", "profilePictureUrl": "", "frontImageUrl": "images/2024/strider2-front.png", "backImageUrl": "images/2024/strider2-back.png", "description": "Second company badge my team made for our company.", "specialInstructions": "", "solderingInstructions": "Very simple badge, leds are the same color and resistors are the same for both leds. Just attach the diodes, resistors, and headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/10/2024 11:51:37" }, { "title": "Strider 3", "author": "Skimice", "profilePictureUrl": "", "frontImageUrl": "images/2024/strider-3-front.png", "backImageUrl": "images/2024/strider-3-back.png", "description": "This is the third badge that my team made for our company. Simple badge with two different colors of diodes.", "specialInstructions": "", "solderingInstructions": "This is a very simple badge 2 diodes, 2 resistors and 4 pin headers. Only thing to call out is orange diode uses resistor with label: 222.\nblue diode uses resistor with label: 103", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/10/2024 12:05:02" }, { "title": "Fox Hunt Challenge Badge", "author": "bfcoder", "profilePictureUrl": "", "frontImageUrl": "images/2024/fox-hunt-challenge-badge-front.png", "backImageUrl": "images/2024/fox-hunt-challenge-badge-back.png", "description": "Beacons will be hidden throughout SAINTCON. Each Beacon resides on a frequency and will be transmitting morse code. It is up to you to find them using Ham Radio, Software Defined Radio (SDR) or other means.", "specialInstructions": "", "solderingInstructions": "• Solder the LEDs first, using the single-pad method for hand soldering.\n• Solder the resistor using the single-pad method for hand soldering. \n• Solder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Contest", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find us and participate in the event.", "rarity": "Rare", "timestamp": "10/10/2024 20:18:16" }, { "title": "The Holy Hand Grenade of Antioch", "author": "goodn3rd", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-holy-hand-grenade-of-antioch-front.jpg", "backImageUrl": "images/2024/the-holy-hand-grenade-of-antioch-back.jpg", "description": "Who wouldn't want a copy of the only know relic blessed by Saint Attila? Just take care as thou countest to three. No more, no less.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering.\n• Solder the two resistors using the same single-pad method for hand soldering.\n• Solder the 4x 2-Position headers, with the artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find goodn3rd around the community area or at trading meetups and\ntrade (or teach them something interesting).", "rarity": "Uncommon", "timestamp": "10/10/2024 21:46:21" }, { "title": "Valorant", "author": "Cyb3rKnight", "profilePictureUrl": "", "frontImageUrl": "images/2024/valorant-front.jpg", "backImageUrl": "images/2024/valorant-back.jpg", "description": "This is the first badge I have designed. I have a riot playing this FPS game with my eSports team and I like the logo a lot.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the two LEDs first, using the single-pad method for hand soldering.\n(Consider soldering the LEDs on their side or adding hot glue to make the badge shine brighter)\n• Solder the two resistors using the same single-pad method for hand soldering.\n• Solder the 4x 2-Position headers, with the artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Cyb3rKnight around the community area or at trading meetups and\ntrade (or teach them something interesting).", "rarity": "Rare", "timestamp": "10/10/2024 21:50:27" }, { "title": "The Atom Bomb", "author": "H4mmer", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-atom-bomb-front.jpg", "backImageUrl": "images/2024/the-atom-bomb-back.jpg", "description": "This is the first badge I have designed. It just looked like a cool image for a minibadge.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED first, using the single-pad method for hand soldering.\n(Consider soldering the LED on its side or adding hot glue to make the badge shine brighter)\n• Solder the resistor using the same single-pad method for hand soldering.\n• Solder the 4x 2-Position headers, with the artwork facing out.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find H4mmer around the community area or at trading meetups and\ntrade (or teach them something interesting).", "rarity": "Rare", "timestamp": "10/10/2024 21:52:56" }, { "title": "Home Assistant Badge", "author": "jsouth117", "profilePictureUrl": "", "frontImageUrl": "images/2024/home-assistant-badge-front.png", "backImageUrl": "images/2024/home-assistant-badge-back.png", "description": "Home Assistant is a favorite hobby of mine", "specialInstructions": "", "solderingInstructions": "Solder resistor to R1, Solder led to D1. Cut and solder pin headers. Add hot glue to the back, covering the led to diffuse the light.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me or tell me about a favorite home automation you have or want to setup", "rarity": "Rare", "timestamp": "10/11/2024 17:37:55" }, { "title": "Mav's Personal Badge 2024", "author": "mav", "profilePictureUrl": "", "frontImageUrl": "images/2024/mavs-personal-badge-2024-front.png", "backImageUrl": "images/2024/mavs-personal-badge-2024-back.png", "description": "Say your prayers, little one.", "specialInstructions": "", "solderingInstructions": "- Solder resistor to R1\n- Solder LED to D1. Short leg in square hole.\n- Make sure you solder the surface mount part first.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find mav at the Hardware Hacking Community, or drifting around the conference.", "rarity": "Uncommon", "timestamp": "10/11/2024 20:44:18" }, { "title": "Everybody Hacks", "author": "mav", "profilePictureUrl": "", "frontImageUrl": "images/2024/everybody-hacks-front.png", "backImageUrl": "images/2024/everybody-hacks-back.png", "description": "Not everyone can become a great hacker - but a great hacker *can* come from anywhere. And not only that, but we *need* as many great hackers with diverse experiences as we can get if we want to grow and be truly great as a group.", "specialInstructions": "", "solderingInstructions": "- Solder resistor to R1\n- Solder LED to D1. \n- For the LED, Arrow should point toward (or green mark/indicator should be on) the OPEN end of the box, because I labeled it wrong. Whoops.\n- Make sure you solder the surface mount parts first.\n\nAdditionally: Flashy LEDs are sensitive to overheat and electrostatic discharge. Make sure you're soldering at 330C or less. If something goes wrong with yours find mav, he has some spares.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find mav at the Hardware Hacking Community, or drifting around the conference.", "rarity": "Uncommon", "timestamp": "10/11/2024 20:46:39" }, { "title": "Idahack v5", "author": "mav", "profilePictureUrl": "", "frontImageUrl": "images/2024/idahack-v5-front.png", "backImageUrl": "images/2024/idahack-v5-back.png", "description": "I bet you think you know what Idaho's largest export is. Nope. Idaho's largest export, by dollar value, is technology, and it isn't even close.", "specialInstructions": "", "solderingInstructions": "- Solder resistor to R1\n- When soldering the LEDs, please note:\n- LEDs are side mounted, meaning the lenses point parallel to the circuit board instead of toward the back/badge surface.\n- Align the green arrow on the LED pointing inside the box, or the indicator line/mark furthest into the box. Note that the arrows/indicators point toward the *center* of the two LED positions - the LEDs do not both go the same way.\n- There are two variations of this badge, the Really, Really Freakin Bright version and the regular version. There are more of one than the other.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find mav at the Hardware Hacking Community, or floating around the con.", "rarity": "Uncommon", "timestamp": "10/11/2024 20:53:01" }, { "title": "A Nice Game Of Chess", "author": "mav", "profilePictureUrl": "", "frontImageUrl": "images/2024/a-nice-game-of-chess-front.png", "backImageUrl": "images/2024/a-nice-game-of-chess-back.png", "description": "Is it a game, or is it real?", "specialInstructions": "", "solderingInstructions": "- Solder resistor to R1\n- solder LED to D1. Diode indication: arrow should point into the box, or green indicator should go inside box. \n- Make sure you solder the surface mount parts first.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find mav at the Hardware Hacking Community, or floating around the con, and tell him what the password is.", "rarity": "Uncommon", "timestamp": "10/11/2024 20:54:51" }, { "title": "Brucifer 2024", "author": "Brucifer", "profilePictureUrl": "", "frontImageUrl": "images/2024/brucifer-2024-front.png", "backImageUrl": "images/2024/brucifer-2024-back.png", "description": "The winking tapir returns again this year as the \"Dark Tapir\". This year it uses a different RC delay circuit, but with smaller components than last year.", "specialInstructions": "", "solderingInstructions": "- Solder the D1 and D2 amber LEDs upside down (so the LED shines through the holes toward the front), with the cathode toward the top of the mini-badge, using the single-pad method for hand soldering.\n- Solder the R1 & R2 resistors (1K ohm, labelled \"102\"), using the single-pad method for hand soldering.\n- Solder the R3 resistor (10K ohm, labelled \"1002\"), using the single-pad method for hand soldering.\n- Solder the C1 capacitor, using the single-pad method for hand soldering.\n- Solder the 4x 2-Position headers", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or social engineer one from me. Find me at the Health Care Hacking Community.", "rarity": "Super Rare", "timestamp": "10/12/2024 18:14:42" }, { "title": "SAO Adapter", "author": "Brucifer", "profilePictureUrl": "", "frontImageUrl": "images/2024/sao-adapter-front.png", "backImageUrl": "images/2024/sao-adapter-back.png", "description": "Returning again this year, this MiniBadge is an adapter that allows you to plug DEFCON SAO v1.69bis compatible SAOs into the SAINTCON badge. It only supports the 3V3, GND, SDA, and SCL pins. Without modification, it will not support the GPIO1 and GPIO2 pins.", "specialInstructions": "", "solderingInstructions": "- Insert the 2x3 pin header through the holes on the front of the badge, aligning the position key toward the top, matching\nthe header outline on the front of the badge\n- Solder the 2x3 pin header pins on the back side of the badge\n- Solder the 8-position headers", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Show me the SAO you want to display on the SaintCon badge. Find me at the Health Care Hacking Community.", "rarity": "Super Rare", "timestamp": "10/12/2024 18:40:37" }, { "title": "Health Care Hacking Community Prize Badge", "author": "Brucifer", "profilePictureUrl": "", "frontImageUrl": "images/2024/health-care-hacking-community-prize-badge-front.png", "backImageUrl": "images/2024/health-care-hacking-community-prize-badge-back.png", "description": "A 2x2-sized mini-badge with an analog meter and a pulse sensor, to measure your pulse from a finger. The pulse sensor (https://pulsesensor.com) can also be used with an Arduino. Can also be connected to a DEFCON badge via SAO.", "specialInstructions": "", "solderingInstructions": "- Solder SAO socket to back of PCB, lining up socket notch with silkscreen line & gap\n- Solder Male header pins to back of PCB\n- Solder Female header sockets to front of PCB\n- Bolt SO-45 to front of PCB. One flat washer per meter bolt on front of PCB, one flat washer, lock washer, and nut per meter bolt on back of PCB\n- Snap pulse sensor into sensor case\n- Connect pulse sensor to badge with header wires, Sig -> S, P+ -> +, P- -> -\n- Plug badge into SaintCon badge, mini-badge extender, 10x10, (via lower right pins) or DefCon badge (via SAO) to power up", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Award", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Compete in the Health Care Hacking Community contest, and earn a Top 20 score.", "rarity": "Super Rare", "timestamp": "10/12/2024 18:57:24" }, { "title": "Glados", "author": "5NCX", "profilePictureUrl": "", "frontImageUrl": "images/2024/glados-front.png", "backImageUrl": "images/2024/glados-back.png", "description": "This Glados badge is an homage to the Portal games, and features a cut out so the orange LED on the back will shine through Glados' \"eye\" and bring back the nostalgia! It's an easy build, and I'll provide the LED, pins, and resistor necessary for the build.", "specialInstructions": "", "solderingInstructions": "It's a simple build using only an LED and a resistor on the back. Everything is labeled on the back, and all you'd need is a soldering kit!", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "I only have a few so they're only available to be traded with cool badges if you see me.", "rarity": "Super Rare", "timestamp": "10/13/2024 14:55:03" }, { "title": "Hack My Dog", "author": "5NCX", "profilePictureUrl": "", "frontImageUrl": "images/2024/hack-my-dog-front.png", "backImageUrl": "images/2024/hack-my-dog-back.png", "description": "I will have my service dog with me and decided to start a fun side challenge! More details about the challenge can be found on Discord on Monday before the conference starts. The challenge will start on Tuesday, at 1:30 when I'm presenting. #He's still a service dog responsible for helping me, so please ask before petting him and wait so you don't startle us. We won't always be social, so we appreciate your understanding :)", "specialInstructions": "", "solderingInstructions": "You'll need an LED, a resistor, and some pins, which I'll provide. Each component is labeled on the back of the badge, so you'll just solder them on the board, and that's it!", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "You can earn one between Tuesday and Friday by solving any of the \"Hack My Dog\" challenges!", "rarity": "Super Rare", "timestamp": "10/13/2024 15:37:54" }, { "title": "Palo Alto Saintcon Sponsor Minibadge", "author": "Palo Alto", "profilePictureUrl": "", "frontImageUrl": "images/2024/palo-alto-saintcon-sponsor-minibadge-front.png", "backImageUrl": "images/2024/palo-alto-saintcon-sponsor-minibadge-back.png", "description": "Palo Alto provides NGFW's just like their firewalls their minibadges are also next generation", "specialInstructions": "", "solderingInstructions": "This badge uses the SMD soldering pad method. You will need to \"reverse\" the header pins so that the long ends stick up through the board on the lower left and upper right corners. See the assembly video . https://bit.ly/fbspaloalto", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Sponsor", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Visit the Palo Alto Sponsor Booth", "rarity": "Uncommon", "timestamp": "10/13/2024 19:53:48" }, { "title": "Zeek MiniBadge", "author": "Eldon Koyle", "profilePictureUrl": "", "frontImageUrl": "images/2024/zeek-minibadge-front.png", "backImageUrl": "images/2024/zeek-minibadge-back.png", "description": "MiniBadge with Zeek logo", "specialInstructions": "", "solderingInstructions": "Orient the LEDs with the green line next to the closed end of the box on the silkscreen when soldering. Kit should contain 2 LEDs and 2 resistors.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Available in Blue Team Community", "rarity": "Uncommon", "timestamp": "10/14/2024 16:39:34" }, { "title": "Lucid", "author": "Lucid", "profilePictureUrl": "", "frontImageUrl": "images/2024/lucid-front.jpg", "backImageUrl": "images/2024/lucid-back.jpg", "description": "Members of the Lucid Security Team have been attending SaintCon for years and finally wanted to get into the action with our own MiniBadge.", "specialInstructions": "", "solderingInstructions": "- Place the orange LED on D1 (negative is on the bottom).\n- Place the 66 Ohm resistor on R1", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find a member of the Lucid Security Team strike up a conversation. We'd love to make a trade.", "rarity": "Rare", "timestamp": "10/15/2024 16:22:35" }, { "title": "Is that a wolf?", "author": "RaideR6672", "profilePictureUrl": "", "frontImageUrl": "images/2024/is-that-a-wolf-front.jpg", "backImageUrl": "images/2024/is-that-a-wolf-back.jpg", "description": "This is a re-print of my badge from last year. Just a design I came up with for fun.", "specialInstructions": "", "solderingInstructions": "- Blue LEDs go in D1 & D2.\n- 5 Ohm resistors go in R1 and R1. \nTIP: If you lose a resistor or two, you can just bridge the pads.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and find me and offer me a trade. HINT: I'm bald with a long red beard.", "rarity": "Super Rare", "timestamp": "10/15/2024 19:18:31" }, { "title": "Yeah, I'm pretty sure that's a wolf", "author": "RaideR6672", "profilePictureUrl": "", "frontImageUrl": "images/2024/yeah-im-pretty-sure-thats-a-wolf-front.jpg", "backImageUrl": "images/2024/yeah-im-pretty-sure-thats-a-wolf-back.jpg", "description": "This is a re-print of my badge from last year. Just a design I came up with for fun.", "specialInstructions": "", "solderingInstructions": "- Blue LEDs go in D1 & D2.\n- 5 Ohm resistors go in R1 and R1. \nTIP: If you lose a resistor or two, you can just bridge the pads.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come and find me and offer me a trade. HINT: I'm bald with a long red beard.", "rarity": "Super Rare", "timestamp": "10/15/2024 19:21:44" }, { "title": "JJohnson", "author": "Timmy C", "profilePictureUrl": "", "frontImageUrl": "images/2024/jjohnson-front.png", "backImageUrl": "images/2024/jjohnson-back.png", "description": "This is my first badge I have attempted. I also wanted to dedicate it to one my favorite movies, that most guys love and most wives dislike.", "specialInstructions": "", "solderingInstructions": "Solder the LEDs first, using the single-pad method for hand soldering.\nSolder the resistor using the single-pad method for hand soldering.\nSolder the Pin Headers to the Badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me", "rarity": "Super Rare", "timestamp": "10/16/2024 9:56:46" }, { "title": "Dragon Eye", "author": "Light", "profilePictureUrl": "", "frontImageUrl": "images/2024/dragon-eye-front.png", "backImageUrl": "images/2024/dragon-eye-back.png", "description": "Dragons were ancient, intelligent, and powerful creatures, both feared and admired throughout Middle-earth. They were originally bred by Morgoth during the First Age to serve as powerful war beasts. Glaurung (Sindarin for \"Gold-worm\") was the first of the dragons and one of the foremost lieutenants of Morgoth. He was a mighty wyrm with cunning intellect and a powerful hypnotic gaze.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/lights-minibadges for instructions and images.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter with me at the minibadge trading space.", "rarity": "Rare", "timestamp": "10/17/2024 17:56:08" }, { "title": "The One Ring", "author": "Light", "profilePictureUrl": "", "frontImageUrl": "images/2024/the-one-ring-front.png", "backImageUrl": "images/2024/the-one-ring-back.png", "description": "One Ring to rule them all, One Ring to find them,\nOne Ring to bring them all and in the darkness bind them. \n\nThis ring is part of a set. Talk to Moomoo and TheTrollGod to collect Narya and Vilya.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/lights-minibadges for instructions and images.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter with me at the minibadge trading space.", "rarity": "Rare", "timestamp": "10/17/2024 17:59:12" }, { "title": "Nenya - Ring of Water", "author": "Light", "profilePictureUrl": "", "frontImageUrl": "images/2024/nenya-ring-of-water-front.png", "backImageUrl": "images/2024/nenya-ring-of-water-back.png", "description": "Nenya, the Ring of Water, was crafted by Celebrimbor of Eregion along with the other two Elven Rings, Narya and Vilya. After learning of the One Ring's existence, Galadriel advised Celebrimbor to keep the rings hidden and unused. He heeded this counsel, first by giving Nenya to Galadriel. Its powers of preservation, protection, and concealment from evil strengthened and beautified Lothlórien until the One Ring's destruction and Sauron's defeat.\n\nThis ring is part of a set. Talk to Moomoo and TheTrollGod to collect Narya and Vilya.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/lights-minibadges for instructions and images.\n\n1. Solder the LEDs on D1 and D2 (green marking goes inside the silkscreen box).\n2. Solder the resistors on R1 and R2 (any orientation).\n3. Solder the 2-pin headers.\n4. Cover the LEDs and unmasked area on the back with hot glue (provided at the Hardware Hacking Community).", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter with me at the minibadge trading space.", "rarity": "Rare", "timestamp": "10/17/2024 18:01:43" }, { "title": "Leaf of Lórien", "author": "Light", "profilePictureUrl": "", "frontImageUrl": "images/2024/leaf-of-l-rien-front.png", "backImageUrl": "images/2024/leaf-of-l-rien-back.png", "description": "Elven brooches were given to all nine members of the Fellowship of the Ring and were used to fasten the hooded cloaks made for them by Galadriel. Each brooch was fashioned like a green leaf veined with silver.", "specialInstructions": "", "solderingInstructions": "Please visit https://sites.google.com/view/lights-minibadges for instructions and images.\n\n1. Solder the LEDs on D1 and D2 (green marking goes inside the silkscreen box).\n2. Solder the resistors on R1 and R2 (any orientation).\n3. Solder the 2-pin headers.\n4. Cover the LEDs and unmasked area on the back with hot glue (provided at the Hardware Hacking Community).", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or barter with me at the minibadge trading space.", "rarity": "Rare", "timestamp": "10/17/2024 18:04:56" }, { "title": "Dot", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/dot-front.png", "backImageUrl": "images/2024/dot-back.png", "description": "I have always loved Animaniacs, and thought they would make a fun minibadge.", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/17/2024 23:52:21" }, { "title": "Wakko", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/wakko-front.png", "backImageUrl": "images/2024/wakko-back.png", "description": "I have always loved Animaniacs, and thought they would make a fun minibadge.", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/18/2024 8:32:29" }, { "title": "Yakko", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/yakko-front.png", "backImageUrl": "images/2024/yakko-back.png", "description": "I have always loved Animaniacs, and thought they would make a fun minibadge.", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/18/2024 8:34:20" }, { "title": "Groot", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/groot-front.png", "backImageUrl": "images/2024/groot-back.png", "description": "This was my first attempt at a minibadge. I was hoping to have it ready for last year, but it did not make it.", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/18/2024 8:36:45" }, { "title": "Mountain Dude", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/mountain-dude-front.png", "backImageUrl": "images/2024/mountain-dude-back.png", "description": "I saw this on a shirt, and said it had to become a minibadge.", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/18/2024 8:39:46" }, { "title": "WILDWest", "author": "Aahz", "profilePictureUrl": "", "frontImageUrl": "images/2024/wildwest-front.png", "backImageUrl": "images/2024/wildwest-back.png", "description": "Our organization is representing Utah in a joint project with Arizona and Nevada to support the science community in remote locations. Providing network solutions for remote locations that support science. Examples we are looking at include Seismic, Wildfire monitoring and the creation of geothermal wells. \"Wild-Area-Networks\"", "specialInstructions": "", "solderingInstructions": "I kept these basic. Just 1 surface mount LED and Resistor.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me, or just ask for one.", "rarity": "Rare", "timestamp": "10/18/2024 8:47:28" }, { "title": "Mario Block", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/mario-block-front.png", "backImageUrl": "images/2024/mario-block-back.png", "description": "First making its apearance in Mario Bros 1. The surprise block will live on!", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find Jup1t3r at the Minibadge Trading Space.", "rarity": "Rare", "timestamp": "10/18/2024 12:04:36" }, { "title": "Mr. Saturn", "author": "Mr. Saturn", "profilePictureUrl": "", "frontImageUrl": "images/2024/mr-saturn-front.png", "backImageUrl": "images/2024/mr-saturn-back.png", "description": "Strange character from a classic video game; honored in badge form.", "specialInstructions": "", "solderingInstructions": "The proper orientation of the LED is to have the solder tab with the clipped corner facing away from the closed end of the silkscreened box around the solder pads. To solder the LED you need to build up the solder on each pad to form little mounds.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and trade me something", "rarity": "Rare", "timestamp": "10/18/2024 13:39:06" }, { "title": "Utah Cyber Center Minibadge", "author": "Jup1t3r", "profilePictureUrl": "", "frontImageUrl": "images/2024/utah-cyber-center-minibadge-front.png", "backImageUrl": "images/2024/utah-cyber-center-minibadge-back.png", "description": "The Utah Cyber Center’s duties are defined in Utah State Code 63A-16-1102. Some of these duties include the creation of a Statewide Strategic Cybersecurity Plan, receiving reports of breaches of system security as outlined in Utah Code 13-44-202 and 63A-19-405, and identifying sources of funding to make cybersecurity improvements throughout the state.", "specialInstructions": "", "solderingInstructions": "• Begin on the back side first.\n• Solder the LED(s) first, using the single-pad method for hand soldering.\n• Solder the Resistor(s) using the same single-pad method for hand soldering. \n• Solder the 4x 2-Position headers.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find a member of the Utah Cyber Center.", "rarity": "Rare", "timestamp": "10/18/2024 15:16:25" }, { "title": "Thing 1", "author": "Dr. Seuss", "profilePictureUrl": "", "frontImageUrl": "images/2024/thing-1-front.png", "backImageUrl": "images/2024/thing-1-back.png", "description": "Thing 1 from Dr. Seuss", "specialInstructions": "", "solderingInstructions": "Simple SMD led soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade - Meet me at Badge trading or Blueteam Village", "rarity": "Rare", "timestamp": "10/19/2024 14:48:58" }, { "title": "Thing 2", "author": "Dr. Seuss", "profilePictureUrl": "", "frontImageUrl": "images/2024/thing-2-front.png", "backImageUrl": "images/2024/thing-2-back.png", "description": "Thing 2 from Dr. Seuss", "specialInstructions": "", "solderingInstructions": "Simple surface mount soldering", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade - see me at badge trading or Blueteam Village", "rarity": "Rare", "timestamp": "10/19/2024 14:50:31" }, { "title": "Firefly Characters - Mal", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/firefly-characters-mal-front.png", "backImageUrl": "images/2024/firefly-characters-mal-back.png", "description": "This series is the five main characters of Firefly and Serenity and one of their main sayings.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/LOxQQyjk5us?si=4UaMkQ6Y8lJ5xgeI", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and ask me. I'll probably be found mostly at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:17:25" }, { "title": "Firefly Characters- Jayne", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/firefly-characters-jayne-front.png", "backImageUrl": "images/2024/firefly-characters-jayne-back.png", "description": "This series is the main characters of Firefly and Serenity, and one of their main sayings.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/LOxQQyjk5us?si=6Wb5h8m_NPUtdFab", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and ask me. I'll most likely be found at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:26:24" }, { "title": "Firefly Characters - Kaylee", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/firefly-characters-kaylee-front.png", "backImageUrl": "images/2024/firefly-characters-kaylee-back.png", "description": "This series is the main characters of Firefly and Serenity, and one of their main sayings.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/LOxQQyjk5us?si=6Wb5h8m_NPUtdFab", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and ask me. I'll most likely be found at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:28:01" }, { "title": "Firefly Characters - Zoe", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/firefly-characters-zoe-front.png", "backImageUrl": "images/2024/firefly-characters-zoe-back.png", "description": "This series is the main characters of Firefly and Serenity, and one of their main sayings.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/LOxQQyjk5us?si=6Wb5h8m_NPUtdFab", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and ask me. I'll most likely be found at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:30:31" }, { "title": "Firefly Characters - Wash", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/firefly-characters-wash-front.png", "backImageUrl": "images/2024/firefly-characters-wash-back.png", "description": "This series is the main characters of Firefly and Serenity, and one of their main sayings.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/LOxQQyjk5us?si=6Wb5h8m_NPUtdFab", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find and ask me. I'll most likely be found at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:32:15" }, { "title": "r0gu3bull3t", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/r0gu3bull3t-front.png", "backImageUrl": "images/2024/r0gu3bull3t-back.png", "description": "As I was playing with AI images, I wanted to see what it would do with my handle, and this is what I got.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/wicf6ZMceFc?si=vkghcsEwGdktfjLo", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and trade with me. I'll most likely be found around the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:35:07" }, { "title": "Cool AI Circuit", "author": "r0gu3bull3t", "profilePictureUrl": "", "frontImageUrl": "images/2024/cool-ai-circuit-front.png", "backImageUrl": "images/2024/cool-ai-circuit-back.png", "description": "I love the look of circuits and wanted to see what AI would do with it and this is what I got.", "specialInstructions": "", "solderingInstructions": "https://youtu.be/FmxTN_F7AR8?si=p2iZqkfz4n0NwzeS", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and trade with me. I'll probably be found mostly at the soldering tables.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:36:54" }, { "title": "Mistborn", "author": "yoshutch", "profilePictureUrl": "", "frontImageUrl": "images/2024/mistborn-front.png", "backImageUrl": "images/2024/mistborn-back.png", "description": "A Mistborn steel-pushing through the dark misty night sky. Fan art (my first attempt) based off of the best-selling novel \"Mistborn: The Final Empire\" by Brandon Sanderson.", "specialInstructions": "", "solderingInstructions": "1. Solder the resistor into the R1 slot\n2. Solder the LED into the D1 slot\n3.For the jumper JP1 slot: connect with solder the a) \"sld\" to the middle cell for a solid light (constantly burning steel to see the allomantic blue lines), or the b) \"blk\" to the middle cell for a blinking light (periodically burning steel to see the allomantic blue lines). DON'T connect all three.\n4. Solder the header pins (2 for each corner)\n5. (optional) Put a blob of hot glue over the LED to diffuse the light more directly through the allomantic lines", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Give me a quote from one of Brandon Sanderson's novels.", "rarity": "Super Rare", "timestamp": "10/19/2024 20:40:06" }, { "title": "Quilt Block", "author": "shector", "profilePictureUrl": "", "frontImageUrl": "images/2024/quilt-block-front.png", "backImageUrl": "images/2024/quilt-block-back.png", "description": "My wife is a quilter and I thought it would be fun to make a badge inspired by her talents. She picked a quilt block, I turned it into a badge, and you can have one.", "specialInstructions": "", "solderingInstructions": "Solder the two LEDs in the spaces marked D1 and D2 using the Single Pad method. Solder the resister in the space marked R1 using the Single Pad method. Solder on the header pins. The resistor will go in the bottom right when plugging in the badge.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with me.", "rarity": "Super Rare", "timestamp": "10/19/2024 21:21:03" }, { "title": "Chumtoad", "author": "s3id3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/chumtoad-front.png", "backImageUrl": "images/2024/chumtoad-back.png", "description": "This minibadge pays homage to the Chumtoad, a creature from the Half-Life video game series! Chumtoads are considered to be “cut content” from the game, having been scrapped before the game’s final release. They are friendly to humans, and one of my personal favorite fauna from the game. Bonus: This is my first minibadge design!", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to R1.\nAttach Red 1206 SMD LED to D1, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 21:40:49" }, { "title": "Moo Deng", "author": "laurenrpace", "profilePictureUrl": "", "frontImageUrl": "images/2024/moo-deng-front.png", "backImageUrl": "images/2024/moo-deng-back.png", "description": "Moo Deng is a viral baby hippo at a zoo in Thailand. She's famous for tripping her mother and biting the water hose and her handler. She is a being of pure chaos.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to R1.\nAttach White 1206 SMD LED to D1, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 21:47:39" }, { "title": "Keith the Rat", "author": "clintonjwalker & s3id3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/keith-the-rat-front.png", "backImageUrl": "images/2024/keith-the-rat-back.png", "description": "Keith the Rat is the (un)official mascot for C++. He is a diseased rat whose hind leg is missing because it was blown off. No further elaboration. I love Keith.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to the pads with the two lines.\nAttach Red 1206 SMD LED to the pads with the box, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or just ask.", "rarity": "Uncommon", "timestamp": "10/19/2024 21:52:46" }, { "title": "LSU", "author": "clintonjwalker & laurenrpace", "profilePictureUrl": "", "frontImageUrl": "images/2024/lsu-front.png", "backImageUrl": "images/2024/lsu-back.png", "description": "Swamp school.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to R1.\nAttach Yellow 1206 SMD LED to D1, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 21:55:39" }, { "title": "Mike the Tiger", "author": "clintonjwalker & s3id3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/mike-the-tiger-front.png", "backImageUrl": "images/2024/mike-the-tiger-back.png", "description": "Mike the Tiger is the mascot of LSU. Mascot Mike can be seen around the LSU campus at various sporting and social events. The real Mike is a Bengal Tiger who lives on the LSU campus. The current reigning tiger is Mike VII, who moved to LSU in 2017.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to the pads with the two lines.\nAttach Yellow 1206 SMD LED to the pads with the box, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 21:58:51" }, { "title": "SIP Club", "author": "s3id3n", "profilePictureUrl": "", "frontImageUrl": "images/2024/sip-club-front.png", "backImageUrl": "images/2024/sip-club-back.png", "description": "Panera Bread could be singlehandedly attributed to motivating my friends and I enough to succeed during our finals. Their “SIP Club” membership allows for unlimited free access to their lineup of drinks, fueling us to study for hours on end.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to R1.\nAttach Pink 1206 SMD LED to D1, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 22:02:56" }, { "title": "Swig", "author": "clintonjwalker & laurenrpace", "profilePictureUrl": "", "frontImageUrl": "images/2024/swig-front.png", "backImageUrl": "images/2024/swig-back.png", "description": "Adding sugar and cream to sodas since 2010.", "specialInstructions": "", "solderingInstructions": "Use single pad method to solder on surface mount components.\nAttach 1206 SMD Resistor to the pads with the two lines.\nAttach Pink 1206 SMD LED to the pads with the box, green facing the inside of the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade.", "rarity": "Uncommon", "timestamp": "10/19/2024 22:06:21" }, { "title": "Lagoonfreek", "author": "GamingOnTheFloor", "profilePictureUrl": "", "frontImageUrl": "images/2024/lagoonfreek-front.png", "backImageUrl": "images/2024/lagoonfreek-back.png", "description": "I created a minibadge design for my father's first time going to SAINTCON. A rollercoaster with lights (hopefully) shining in sequence. (Blue PCB, white silkscreen. I was lazy with the images.)", "specialInstructions": "", "solderingInstructions": "The 68 ohm resistor goes on R1. The 1k ohm resistor goes on R2. The 2k ohm resistor goes on R3. All LEDs are the same. All the capacitors are the same. Easier version using just D2 and R2, jumping C1.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade with Lagoonfreek", "rarity": "Super Rare", "timestamp": "10/19/2024 22:12:07" }, { "title": "Network Gauntlet", "author": "GamingOnTheFloor", "profilePictureUrl": "", "frontImageUrl": "images/2024/network-gauntlet-front.png", "backImageUrl": "images/2024/network-gauntlet-back.png", "description": "Adventure to find all 6 network stones! One stone (LED) from each member of the SAINTCON network team. (Black PCB, White silkscreen, silver copper. I was lazy with the pictures.)", "specialInstructions": "", "solderingInstructions": "***D6 WAS PRINTED FLIPPED!*** D6 (violet LED) needs to be soldered backwards compared to every other LED. \nSee parts list for location of each LED: https://docs.google.com/spreadsheets/d/1gZo9u8EMQuAzSpQ2In0-oYkfDUCe1SNByMXWLdcy5xo/edit?usp=sharing.", "solderingDifficulty": "Intermediate", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Each team member has twenty badges, which come with the yellow LED. Each team member has 100 of their LED: GamingOnTheFloor - Green, LagoonFreek - Blue, Chunk - Orange, SquirrelyStub - Red, shifty - Violet.", "rarity": "Super Rare", "timestamp": "10/19/2024 22:56:24" }, { "title": "Cap", "author": "Spam", "profilePictureUrl": "", "frontImageUrl": "images/2024/cap-front.png", "backImageUrl": "images/2024/cap-back.png", "description": "It's some slang.", "specialInstructions": "", "solderingInstructions": "Install the resistors, Then install the led's Green side in the bracket, Then install header pins.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and mention minibadges, I'll ask you to use CAP in a sentence. Then if you get it wrong, I make fun of you, then laugh, then give you both this one and boomer.", "rarity": "Rare", "timestamp": "10/19/2024 23:53:19" }, { "title": "PanDorica", "author": "CompuDoc", "profilePictureUrl": "", "frontImageUrl": "images/2024/pandorica-front.jpg", "backImageUrl": "images/2024/pandorica-back.jpg", "description": "3d printed cover makes it look like the pandorica from Dr Who but simplified", "specialInstructions": "", "solderingInstructions": "Badge instructions will be posted to GitHub https://github.com/CompuDocUt/SaintConMinibadges", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Ask me", "rarity": "Super Rare", "timestamp": "10/19/2024 23:55:19" }, { "title": "Teva", "author": "Zodiak", "profilePictureUrl": "", "frontImageUrl": "images/2024/teva-front.png", "backImageUrl": "images/2024/teva-back.png", "description": "It's a logo. I stole it. It fits me.", "specialInstructions": "", "solderingInstructions": "Green dots go inside the box. Hot glue makes it shine more.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find zodiak. Trade, barter, beg. I deal in minibadges, stories, and friendship.", "rarity": "Uncommon", "timestamp": "10/19/2024 23:59:24" }, { "title": "Hacker Party Bus section 4", "author": "CompuDoc", "profilePictureUrl": "", "frontImageUrl": "images/2024/hacker-party-bus-section-4-front.jpg", "backImageUrl": "images/2024/hacker-party-bus-section-4-back.jpg", "description": "Buss Full on strange creatures and at least on hacker parts 1-3 are released again but this is part 4", "specialInstructions": "", "solderingInstructions": "https://github.com/CompuDocUt/SaintConMinibadges", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Ask compudoc", "rarity": "Super Rare", "timestamp": "10/20/2024 0:00:08" }, { "title": "Mountain Bike", "author": "Zodiak", "profilePictureUrl": "", "frontImageUrl": "images/2024/mountain-bike-front.png", "backImageUrl": "images/2024/mountain-bike-back.png", "description": "Biking is good for the soul.", "specialInstructions": "", "solderingInstructions": "Green dots go inside the box.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find zodiak. Trade, barter, beg. I deal in minibadges, stories, and friendship.", "rarity": "Uncommon", "timestamp": "10/20/2024 0:02:47" }, { "title": "Bet", "author": "Spam", "profilePictureUrl": "", "frontImageUrl": "images/2024/bet-front.png", "backImageUrl": "images/2024/bet-back.png", "description": "Don't go gamble your life savings....", "specialInstructions": "", "solderingInstructions": "Install resistors, Then install led's, Install the header pins.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and mention minibadges, I'll ask you to use bet in a sentence. Then if you get it wrong, I make fun of you then laugh then give you both this one and boomer.", "rarity": "Rare", "timestamp": "10/20/2024 0:05:30" }, { "title": "Hack Pary bus front", "author": "CompuDoc & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/hack-pary-bus-front-front.jpg", "backImageUrl": "images/2024/hack-pary-bus-front-back.jpg", "description": "https://github.com/CompuDocUt/SaintConMinibadges", "specialInstructions": "", "solderingInstructions": "https://github.com/CompuDocUt/SaintConMinibadges", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Ask Compudoc", "rarity": "Super Rare", "timestamp": "10/20/2024 0:05:33" }, { "title": "Ride your Bike", "author": "Zodiak", "profilePictureUrl": "", "frontImageUrl": "images/2024/ride-your-bike-front.png", "backImageUrl": "images/2024/ride-your-bike-back.png", "description": "Everyone should ride their bikes.", "specialInstructions": "", "solderingInstructions": "Green dots go inside the boxes. There are 2 red, and 1 yellow LED. They are supposed to blend to make a sunset. Experiment with hot glue for effect.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find zodiak. Tell a story and you might get bonus minibadges.", "rarity": "Rare", "timestamp": "10/20/2024 0:06:15" }, { "title": "Hack Party Buss Back", "author": "CompuDoc & SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/hack-party-buss-back-front.jpg", "backImageUrl": "images/2024/hack-party-buss-back-back.jpg", "description": "https://github.com/CompuDocUt/SaintConMinibadges", "specialInstructions": "", "solderingInstructions": "https://github.com/CompuDocUt/SaintConMinibadges", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Trade or Aak Compudoc", "rarity": "Super Rare", "timestamp": "10/20/2024 0:10:23" }, { "title": "Skipidi", "author": "Spam", "profilePictureUrl": "", "frontImageUrl": "images/2024/skipidi-front.png", "backImageUrl": "images/2024/skipidi-back.png", "description": "Toilet", "specialInstructions": "", "solderingInstructions": "Install resistors, then led's, then pins", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and mention minibadges, I'll ask you to use skipidi in a sentence. Then if you get it wrong, I make fun of you then laugh then give you both this one and boomer.", "rarity": "Rare", "timestamp": "10/20/2024 0:10:33" }, { "title": "Ohio", "author": "Spam", "profilePictureUrl": "", "frontImageUrl": "images/2024/ohio-front.png", "backImageUrl": "images/2024/ohio-back.png", "description": "A state", "specialInstructions": "", "solderingInstructions": "Resistor, Led, Pins, In that order.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and mention minibadges, I'll ask you to use bet in a sentence. Then if you get it wrong, I make fun of you then laugh then give you both this one and boomer.", "rarity": "Rare", "timestamp": "10/20/2024 0:12:32" }, { "title": "BSides Salt Lake", "author": "Zodiak", "profilePictureUrl": "", "frontImageUrl": "images/2024/bsides-salt-lake-front.png", "backImageUrl": "images/2024/bsides-salt-lake-back.png", "description": "These were created for BSides Salt Lake 2024. There were leftovers. Nobody ever complained about another minibadge did they?\n\nDidn't count them, not sure how many are left. When they are gone, they are gone.", "specialInstructions": "", "solderingInstructions": "Green dots go inside the box. There are 2 blue and 1 red LED. Place them creatively. Use hot glue for effect. There are no mistakes, only happy accidents.", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find zodiak. He has these.", "rarity": "Rare", "timestamp": "10/20/2024 0:12:35" }, { "title": "Okay BOOMER", "author": "Spam", "profilePictureUrl": "", "frontImageUrl": "images/2024/okay-boomer-front.png", "backImageUrl": "images/2024/okay-boomer-back.png", "description": "If you need to ask... You are one....", "specialInstructions": "", "solderingInstructions": "Resistors, Led (The led on the top is broken. If you would like to find and use a bodge wire be my guest) pins", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Find me and mention minibadges, I'll ask you to use slang in a sentence. Then if you get it wrong, I make fun of you then laugh then give you both this one.", "rarity": "Rare", "timestamp": "10/20/2024 0:15:12" }, { "title": "Badge Hog - Horizontal", "author": "SHIFTY", "profilePictureUrl": "", "frontImageUrl": "images/2024/badge-hog-horizontal-front.png", "backImageUrl": "images/2024/badge-hog-horizontal-back.png", "description": "Did you design an amazing minibadge, but it may or may not be larger than the spec and is hogging all of the badge slots? The Badge Hog solves that problem. \n\nThis is a straight passthrough, so whatever capability your badge has, this will have too!", "specialInstructions": "", "solderingInstructions": "This thing is surprisingly hard to assemble. Put a minibadge on the female headers before soldering them in place. This will add some stability and also help you get the spacing right. The headers are offset so they will fit on a 10x10 or grouped together spaces. This makes them difficult to solder. Then solder on the male pin headers. (See Image.)", "solderingDifficulty": "Advanced", "quantityMade": 0, "category": "Badge Accessory", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Show me the oversized badge your going to use this on.Trade or Barter.", "rarity": "Super Rare", "timestamp": "10/20/2024 6:00:43" }, { "title": "BP GP", "author": "BP", "profilePictureUrl": "", "frontImageUrl": "images/2024/bp-gp-front.jpg", "backImageUrl": "images/2024/bp-gp-back.jpg", "description": "Minibadge depicting a Mini John Cooper Works GP. Been one of my favorite cars forever, and finally picked one up. Look for the real life version parked outside the con. Thanks to klipper for the quick design at the last minute.", "specialInstructions": "", "solderingInstructions": "Solder the resistor and LEDs per the screenprint", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and trade me. I'm on the badge team and will likely be running around somewhere.", "rarity": "Uncommon", "timestamp": "10/20/2024 14:00:12" }, { "title": "Darkhorse Badge", "author": "Mini BP", "profilePictureUrl": "", "frontImageUrl": "images/2024/darkhorse-badge-front.jpg", "backImageUrl": "images/2024/darkhorse-badge-back.jpg", "description": "Badge celebrating the Mustang Dark Horse", "specialInstructions": "", "solderingInstructions": "Solder the resistor and LED's per the screenprint", "solderingDifficulty": "Beginner", "quantityMade": 0, "category": "Personal", "conferenceYear": "2024", "boardHouse": "", "howToAcquire": "Come find me and trade me. You'll likely find me around badge life or helping my Dad (full size BP). We look the same, and likely will have the same badges on us...so if you need the Mini or the Dark Horse ask us.", "rarity": "Uncommon", "timestamp": "10/20/2024 14:02:22" } ]